blakep82
|
 posted on 7/10/08 at 06:54 PM |
|
|
why does everything i buy end up being wrong?!
grrrr....
got a mondeo clutch cylinder off someone on here for my type 9 box. great. looks just the job. worked out the length of the spacer needed, and since i
don't have a lathe, and the engineering dude in my town can be a bit hit and miss sometimes, i decided it would be easier to just to buy a
spacer. burton power seemed best, turned up today. perfect. except the o.d of the spacer is just too small to bolt the cylinder on to... great...
still, never mind, i'll work something out. on to the next think that arrived. been struggling to get the right thread nuts for MC mounting
bolts welded to the chassis. thought i'd worked it out. its imperial, worked out its 7/16" and my thread guage is only metric or witworth
thread. found it all lined up on the witworth gauge. ok, unusual perhaps, but fine. ordered some nuts. no, wrong thread. still in the blind.
fan-f'ing-tastic... been waiting a week for those parts
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
|
|
coozer
|
| posted on 7/10/08 at 06:59 PM |
|
|
So, what was wrong with the standard cable setup the box came with??
Nevermind, we all go through these sort of things, I've now got a Rover turbo engine in the garage that doesn't fit my car!! :
[Edited on 7/10/08 by coozer]
1972 V8 Jago
1980 Z750
|
|
|
blakep82
|
| posted on 7/10/08 at 07:02 PM |
|
|
starting to wonder why i didn't go cable clutch myself... ha ha, i know fine well why i didn't, my chassis was bought with the MC cylinder
mount already, same with the pedal box, plus i didn't have the clutch arm and stuff already, so i HAD to buy something. made sense to go
hydraulic from the start
oh, and i've got a 3 litre v6 in the garage that doesn't fit my car either... didn't buy that though
[Edited on 7/10/08 by blakep82]
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
coozer
|
| posted on 7/10/08 at 07:07 PM |
|
|
With ya there, I thought about it as well just cause I'd loverto be able to say.. "Oh its off a Mondy" and smile smugly
1972 V8 Jago
1980 Z750
|
|
|
owelly
|
| posted on 7/10/08 at 07:10 PM |
|
|
I cheated. I bought the Mondy slave for £10 from a scrappy. Then turned the trumpety bit down in my handy lathe and cobbled it together.
http://www.ppcmag.co.uk
|
|
|
blakep82
|
| posted on 7/10/08 at 07:13 PM |
|
|
yeah, that was the idea, but i'd still have needed a 20mm (or so) spacer. don't know what to do now... don't really want to spend
£100 on the cylinder that fits the spacer and mount... grrr
need someone to make me a new spacer really i suppose.
[Edited on 7/10/08 by blakep82]
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
mistergrumpy
|
| posted on 7/10/08 at 07:19 PM |
|
|
Nah you're not on your own at all. A brief list of what I've bought and own whilst trying to get it right:
2 sets of wishbones
2 sets of wheels
3 diffs
2 sets of driveshafts
2 aluminium dashboards made
2 fuel tanks
2 fuel filters
2 sets of suspension parts inc. springs
2 sets of bottom ball joints
3 left upper ball joints
1 right upper ball joint
done and replaced both front brake lines
2 propshafts
I'm also on my 2nd set of bodywork, though that one wasn't down to me
|
|
|
blakep82
|
| posted on 7/10/08 at 07:22 PM |
|
|
are you buildoing 2 cars?! 
oh, and a gearbox mount. i bought one of them too, doesn't fit...
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
mistergrumpy
|
| posted on 7/10/08 at 07:26 PM |
|
|
Keep pushing on mate. I'm only trying to build the one car.
It's more like a battle between me and the thing in the garage now. I'm literally less than 8 hours away from finishing the thing but at
the moment every final thing goes wrong and it's peeing me off.
I'll bloody win though, if only through spite!
|
|
|
blakep82
|
| posted on 7/10/08 at 07:31 PM |
|
|
i keep having targets, then missing them pretty badly... first one was my sisters wedding in august 08. had a year, car was barely a rolling chassis
at the end of it. next one is to get it through SVA before it finishes. hmm, 5 months away, and its, er, barely a rolling chassis, with 2nd hand
bodywork (mostly broken) repaired and sprayed to try and make it presentable
not gonna happen is it?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
RichieW
|
| posted on 7/10/08 at 08:29 PM |
|
|
"I love deadlines. I like the whooshing sound they make as they fly by."
Douglas Adams
English humorist & science fiction novelist (1952 - 2001)
|
|
|
blakep82
|
| posted on 7/10/08 at 10:15 PM |
|
|
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
ashg
|
| posted on 7/10/08 at 10:21 PM |
|
|
blake if you have a drawing/dimensions i can turn you a spacer as long as i can find a bit of suitable scrap.
Anything With Tits or Wheels Will cost you MONEY!!
Haynes Roadster (Finished)
Exocet (Finished & Sold)
New Project (Started)
|
|
|
blakep82
|
| posted on 7/10/08 at 10:56 PM |
|
|
^ Cool! 
i'm not very good at technical stuff though... theres an engineering place in town, can be a bit hit and miss some times, but i'd be able
to take the spacer i've got to him and he can basically copy it in bigger diameter i think, so i'll give him a shot first
[Edited on 7/10/08 by blakep82]
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
clairetoo
|
| posted on 8/10/08 at 06:19 AM |
|
|
You have my sympathy on this one - I ended up buying three different master cylinders (and taking the engine out to alter the mount on mine after I
thought it was all finished...)
If your still stuck later in the week , I have a scrap type nine and a broken mondeo cylinder - all I would need is the length and I may have a bit of
ally hanging around to knock something up out of.....
[img][/img]
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
mcerd1
|
| posted on 8/10/08 at 08:44 AM |
|
|
quote:
Originally posted by mistergrumpy
Nah you're not on your own at all. A brief list of what I've bought and own whilst trying to get it
right:................................................
and I thought my 3 donor cars was bad
|
|
|
mistergrumpy
|
| posted on 8/10/08 at 10:04 AM |
|
|
Just had to go and pick up my 4th clutch cable arm for the ZX9. Sodding thing has been eating them. Think I'm sorted now though.
|
|
|
mistergrumpy
|
| posted on 8/10/08 at 12:51 PM |
|
|
Just to add. No I put it in, pressed the clutch and.... nope! Another one bol***ked
Therefore subscribing again to the "everything I buy/do goes wrong!"
|
|
|
blakep82
|
| posted on 19/10/08 at 08:20 PM |
|
|
ok, this should work
 
Description
i think 3mm for the steel should be alright shouldn't it?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Hugh Paterson
|
| posted on 19/10/08 at 09:32 PM |
|
|
Lets play Spin the spacer
Hi Blake, u have a u2u
Shug
|
|
|
blakep82
|
| posted on 19/10/08 at 09:46 PM |
|
|
u2u2u2!
happy days
[Edited on 19/10/08 by blakep82]
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
blakep82
|
| posted on 31/10/08 at 07:23 PM |
|
|
ha ha ha! it works! happy enough with how it all worked out i must say
 
clutch1
 
clutch2
 
clutch3
 
clutch4
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
