NS Dev
|
| posted on 22/2/07 at 03:44 PM |
|
|
CNC machining job, help needed urgently!!
Hi,
can anybody help within the next 10 days to machine two "sprocket cups" for me.
Here's a piccy of the type of thing, I have drawings on autocan and can email the dxf file. Its basically the "inverse sprocket" cup
part in the pic, but with 16 teeth instead of 14.
 
coupler
[Edited on 22/2/07 by NS Dev]
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
|
|
Agriv8
|
| posted on 22/2/07 at 04:55 PM |
|
|
NS,
doesnt Berrisford have them off the shelf as it were ?
Had a look for a website .
regards
Agriv8
[Edited on 22/2/07 by Agriv8]
Taller than your average Guy !
Management is like a tree of monkeys. - Those at the top look down and see a tree full of smiling faces. BUT Those at the bottom look up and see a
tree full of a*seholes .............
|
|
|
NS Dev
|
| posted on 22/2/07 at 05:13 PM |
|
|
yea but only for 14 tooth. Smallest aprilia off the shelf sprocket is 15 tooth (std is 16t)
Cost then mounts up, cups from berrisford are £60 each, plus £45 each for custom sprockets, thats £210 +vat just to get the drive off the engines!
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
