Hi,

can anybody help within the next 10 days to machine two "sprocket cups" for me.

Here's a piccy of the type of thing, I have drawings on autocan and can email the dxf file. Its basically the "inverse sprocket" cup part in the pic, but with 16 teeth instead of 14.




coupler

[Edited on 22/2/07 by NS Dev]

NS,

doesnt Berrisford have them off the shelf as it were ?

Had a look for a website .


regards

Agriv8

[Edited on 22/2/07 by Agriv8]

yea but only for 14 tooth. Smallest aprilia off the shelf sprocket is 15 tooth (std is 16t)

Cost then mounts up, cups from berrisford are £60 each, plus £45 each for custom sprockets, thats £210 +vat just to get the drive off the engines!