Board logo

I'm knackered today, are you
Hellfire - 8/1/07 at 09:27 AM

Cream crackered I am, maybe it's the build up from Xmas... glad I got that off me chest.

<Back to hibernation> ZzZzZZZZZZZ

Steve


macnab - 8/1/07 at 09:39 AM

or you just ate to much


Surrey Dave - 8/1/07 at 10:09 AM

I'm knackered everyday , I have drap sleep patterns and am a bit nocturnal!!!!


Should have been a hedgehog!


iank - 8/1/07 at 10:12 AM

<tongue in cheek>
Probably tired from driving everywhere at 12k rpm, what you need is a nice lazy reving CEC
</tongue in cheek>

p.s. yes I'm knackered too, but that was probably the late night swearing at machinemart.


mackei23b - 8/1/07 at 10:26 AM

Fourth day back for me and it still feels like I'm getting up in the middle of the night!

Perhaps I should come in from the garage a little earlier.........


macnab - 8/1/07 at 10:31 AM

easy solution... forth cup today and off for another.

[Edited on 8/1/07 by macnab] Rescued attachment OriginalReg.jpg
Rescued attachment OriginalReg.jpg


mackei23b - 8/1/07 at 11:05 AM

quote:
Originally posted by macnab
easy solution... forth cup today and off for another.

[Edited on 8/1/07 by macnab]


Hi Scott

Think I'll your advice, I'm on my third cup, how's the heli? I forgot to give you the starter shaft when you picked it up, drop me a U2U with your address and I'll post it up to you, it fits straight onto a sulivan dynotron starter if it's of use.

Cheers

Ian


[Edited on 8/1/07 by mackei23b]


macnab - 8/1/07 at 12:02 PM

Hi Ian,

Obviously the weathers not been up to much so work on it has been restricted to just fitting an O.S 40 engine, another rotor head that holds the blades level and some carbon blades. Only had it running up to mid throttle so as to trim the blades since the neighbours moan about me flying round the houses and our fields got animals in it, but all seems fine. Oh yeah I put a 2000mh battery in it, as well since the gyro's mechanical, been a while since I have one of those

As soon as blowing a gale I'm going to take a load of aircraft up the club and have a few flights.

I'll let you know how I get on and take some pics.

Cheers.

scott.


mackei23b - 8/1/07 at 12:39 PM

quote:
Originally posted by macnab
Hi Ian,

Obviously the weathers not been up to much so work on it has been restricted to just fitting an O.S 40 engine, another rotor head that holds the blades level and some carbon blades. Only had it running up to mid throttle so as to trim the blades since the neighbours moan about me flying round the houses and our fields got animals in it, but all seems fine. Oh yeah I put a 2000mh battery in it, as well since the gyro's mechanical, been a while since I have one of those

As soon as blowing a gale I'm going to take a load of aircraft up the club and have a few flights.

I'll let you know how I get on and take some pics.

Cheers.

scott.


Good stuff, I will need to get the dust off my heli and get it out when the good weather comes

Cheers

Ian