Board logo

Oven help needed
sprouts-car - 28/8/10 at 05:49 PM

Here we have a picture of my oven:
Oven full
Oven full

As you can see, it is impossible to see what setting does what on the control knob.

Has anyone seen this oven before?
Does anyone know what does what?

C

Ps - the control knob his 5 settings with off at the top

[Edited on 28/8/10 by sprouts-car]

[Edited on 28/8/10 by sprouts-car]

stevebubs - 28/8/10 at 05:51 PM

Don't know what the knobs do, but are you wearing high heels?

sprouts-car - 28/8/10 at 05:57 PM

quote:
Originally posted by stevebubs
Don't know what the knobs do, but are you wearing high heels?


You should see what I was wearing before i realised there was a reflection

westf27 - 28/8/10 at 05:59 PM

at a guess,green light is power on,amber light stat calling for heat.Left knob oven or grill,right knob thermostat for oven,turned fully clockwise for grill use.If I win the prize you can donate it to a charity of your choice

stevebubs - 28/8/10 at 05:59 PM

Noooo!!!!


sprouts-car - 28/8/10 at 06:11 PM

quote:
Originally posted by westf27
at a guess,green light is power on,amber light stat calling for heat.Left knob oven or grill,right knob thermostat for oven,turned fully clockwise for grill use.If I win the prize you can donate it to a charity of your choice



But what are the 4 setting on the oven/grill knob?

stevebubs - 28/8/10 at 06:20 PM

Do you know what brand it is?

steve m - 28/8/10 at 06:27 PM

warm
hot
hotter

and fing to hot to touch

stevebubs - 28/8/10 at 06:28 PM

http://www.ukwhitegoods.co.uk/ is probably a good place to ask this question...

steve m - 28/8/10 at 06:29 PM

i would ask the wife ??

stevebubs - 28/8/10 at 06:30 PM

Start taking it apart and trace the controls....

balidey - 28/8/10 at 06:41 PM

open the door and see if there is a manufacturers plate on the inside part where the door fits. Should have a make and model number for you to google with

RAYLEE29 - 28/8/10 at 07:21 PM

its a dishwasher isnt it lol
Ray

robocog - 28/8/10 at 10:36 PM

Just wind both the knobs to where you think 11 should be and use the glass front to see when the powder coat has fully cured

Remember to only use a heat proof torch if none of the controls make it light up good enough to see whats going on

Regards
Rob

Macbeast - 29/8/10 at 06:03 AM

Looks the same as mine. One of the knobs will have 5 click positions, the other will turn smoothly like a volume control.

Click positions are :

1 (pointing straight up ) OFF
2 LIGHT
3 LOWER elememnt
4 BOTH (what you would normally use to roast stuff )
5 GRILL ( upper element only )

The other knob is temperature control: almost everything is at 180 deg with knob at 7 o' clock. 220 deg is at 9 o' clock