nickm
|
| posted on 27/5/20 at 07:40 PM |
|
|
headlight protecters J15
Hi
Hoping to start fitting my headlight protecters this weekend any tips for attaching/fitting/trimming the perspex etc i know they will need a small bit
of trimming and was thinking of a dremel type tool
Is it worth fitting a rubber type trim to the outers ?
Thanks
Nick M
|
|
|
|
|
padrc66
|
| posted on 2/6/20 at 08:20 PM |
|
|
Hi, sorry i've only just got around to replying. I fitted mine last year and ended up 3D printing some brackets to screw to the body and the
covers. i didn't trim the covers and there wasn't really room for an edge trim.
i'll try to get some pictures tomorrow and send them over.
Paul D
|
|
|
padrc66
|
| posted on 2/6/20 at 08:23 PM |
|
|
 
Description
here's one picture
|
|
|
nickm
|
| posted on 3/6/20 at 07:23 PM |
|
|
Hi Paul
Thanks they look very neat, i might be able to make some small brackets using an old after market pedal set which have backing strips that have
threaded reinforced holes cut in them.
Think i will have to trim one of the 3 sides a little and as you said no room for trim.
Ta
Nick M
|
|
|
