Antnicuk
|
| posted on 19/2/08 at 08:13 PM |
|
|
Escort Stalks to Sierra wiring loom, HELP please
I have ford stalks, i am pretty sure they are escort, they have the round hazard button on top and there is a flasher relay plugged directly into the
bottom.
I have got a new wiring loom from Carlooms.co.uk which has a relay in the loom. Does anyone have any idea how i wire this up?
Most of the numbers correspond but there are a few that dont
thanks
[Edited on 19-2-08 by Antnicuk]
[Edited on 25-2-08 by Antnicuk]
600 BHP per ton, Stylus Brought back from the dead! Turbo Rotary Powered!
|
|
|
|
|
mackei23b
|
| posted on 19/2/08 at 08:19 PM |
|
|
Here is the circuit that I used with Sierra Stalks that I had.
Cheers
Ian
 
Rescued attachment WD Indicator.JPG
|
|
|
Antnicuk
|
| posted on 19/2/08 at 09:39 PM |
|
|
thanks for that, i dont suppose anybody has the wipers side?
600 BHP per ton, Stylus Brought back from the dead! Turbo Rotary Powered!
|
|
|
mackei23b
|
| posted on 19/2/08 at 10:23 PM |
|
|
quote:
Originally posted by Antnicuk
thanks for that, i dont suppose anybody has the wipers side?
Sorry, don't have a windscreen so didn;t get that far with wipers!
|
|
|
mistergrumpy
|
| posted on 19/2/08 at 10:35 PM |
|
|
This do you
 
Stalks
|
|
|
Antnicuk
|
| posted on 24/2/08 at 09:01 PM |
|
|
I have attached some pictures of the stalks i have, the wiring doesnt seem to match the pictures posted above. Does anyone have any idea on what the
wiring should be,
I bought a bog standard Car Looms loom which i think are used by Robin Hood for the sierra donor.
Any help with wiring these stalks up with this loom would be greatly received as Car Looms.co.uk couldnt help.
600 BHP per ton, Stylus Brought back from the dead! Turbo Rotary Powered!
|
|
|
.jpg){kind=avatar}
