mangogrooveworkshop
|
| posted on 5/5/07 at 05:41 PM |
|
|
Koso install info required
Koso install cont
6 magnets indexed and pushed into 6mm holes with the n pole outwards. Epoxy put in and hydralic lock achieved and over come by pressing in.
Tough to get in less likely to come out
[Edited on 8-5-07 by mangogrooveworkshop]
 
Rescued attachment koso install.JPG
|
|
|
|
|
mangogrooveworkshop
|
| posted on 8/5/07 at 10:35 PM |
|
|
RIGHT
The next thing I want to do is to tap the second temp sensor into an oil source to read the temp of the oil.
Its a fazer 1000 04 motor so I need some ideas. thinking the head cover or the sump plug. Im using a pelapump to do oil changes so that would stay
put.
That area is really exposed so thats a last resort.....
Ideas folks...... and what thread is it?
|
|
|
