kev R1
|
| posted on 28/3/06 at 07:57 PM |
|
|
hazard lights!
just a quick question, do i need a separate rely (flasher unit)for ny hazards or can i use the same one for direction?
|
|
|
|
|
RazMan
|
| posted on 28/3/06 at 08:04 PM |
|
|
The same flasher will do both jobs - it's all in the wiring 
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
kev R1
|
| posted on 28/3/06 at 08:06 PM |
|
|
only prob i'm getting is that because you need a permanent live for the hazards it's somehow going back to the rest of the loom and
powering evrything else up. so i think i'll just stick another relay in,!! grrr
|
|
|
Chris_G
|
| posted on 29/3/06 at 08:40 AM |
|
|
Here's a diagram I picked up along the way if it helps......
Chris
 
Rescued attachment Hazard Wiring.jpg
Now finished! Xflow-Zetec swap with GSXR TB's and Megasquirt.
|
|
|
bigrich
|
| posted on 29/3/06 at 09:30 PM |
|
|
i went the two relay way just to make the wiring easier but have seen it done the other way too
are you using the savage switches
|
|
|
