ian.stewart
|
| posted on 27/5/17 at 08:33 AM |
|
|
Mounting a coil pack
In my quest for keeping my engine bay neat n tidy, is there any problem mounting my coilpack to the block, probably on rubber isolator blocks,
Something different, Very different..............
|
|
|
|
|
40inches
|
| posted on 27/5/17 at 08:53 AM |
|
|
I fixed mine to a bracket mounted on the top of the bell housing, it's still there
 
Description
 
Description
|
|
|
r1_pete
|
| posted on 27/5/17 at 10:33 AM |
|
|
Mines bolted to a plate on a dummy distributor fitting, so same as, on the block, its fine.
|
|
|
HowardB
|
| posted on 27/5/17 at 12:55 PM |
|
|
Zetec engines have the coils on a bracket on the back of the block,. hth
Howard
Fisher Fury was 2000 Zetec - now a 1600 (it Lives again and goes zoom)
|
|
|
lsdweb
|
| posted on 27/5/17 at 04:58 PM |
|
|
Standard on a lot of French cars although probably not the best example of reliability :-)
|
|
|
big-vee-twin
|
| posted on 28/5/17 at 12:14 PM |
|
|
On my Duratec Ford bolt the coil pack directly to the rear of the head.
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
