Barkalarr
|
| posted on 14/12/13 at 11:11 AM |
|
|
Zetec PATS into Sierra Column
I'm trying to fix my Zetec PATS immobilizer into my sierra column but the transceiver is a bit big to fix nicely against the column.
I've got a key with the red immobilizer section in it.
 
Description
There's not enough space between the transceiver and the wipers mechanism at the top of this picture which I've marked rather poorly in
red
 
Description
Where am I best to trim? The column or the transceiver?
Does the round plastic part of the transceiver contain the "aerial" for the immobilizer in the key?
I've got a windscreen on the car so I need the wiper switch on the column - removing that is not an option.
I'm following the "big_wasa" install manual that says:
"The ring sit's around the ignition switch and is held to the steering column with one screw"
Any ideas?
|
|
|
|
|
big_wasa
|
| posted on 14/12/13 at 02:11 PM |
|
|
On the mondeo its held with one screw. On the sierra I just rotated it around where you have it now until it cleared every thing and held it there
with a blob of PU.
|
|
|
Barkalarr
|
| posted on 16/12/13 at 01:10 PM |
|
|
Warren, what's the size/spec of the resister which goes on the PATS LED indicator ?
(#2 of your install manual)
|
|
|
