daveb666
|
| posted on 30/7/13 at 10:25 AM |
|
|
Dominator Headlight fitted photos?
I've got some Dominator Headlights to fit to my Locost but I'm not sure what to do with the wiring. obviously it just comes out of the
hole in the rear of the headlight.
Do people put this wiring in a heat-shrink/conduit/silicone hose etc? I've routed around for pics but can't find anything that shows me
what has been done.
|
|
|
|
|
Sloan85
|
| posted on 30/7/13 at 10:50 AM |
|
|
I have used 11mm split conduit and cable tied it to the mounting bracket. This then passes through an 11mm hole in the side panel.
There are probably tidier ways to do this though.
[Edited on 30/7/13 by Sloan85]
http://mkindygsxr.blogspot.co.uk
|
|
|
Irony
|
| posted on 30/7/13 at 10:53 AM |
|
|
I have done the same with my twin photons. I used large bore heat shrink tubing over the convoluted tubing at the rear of the head light.
|
|
|
40inches
|
| posted on 30/7/13 at 11:54 AM |
|
|
I used shower hose, cheap as chips, and has a lining to protect the wiring 
 
Description
|
|
|
coozer
|
| posted on 30/7/13 at 12:02 PM |
|
|
How about drilling holes in the mounting bar and threading the cables through to hide them?
1972 V8 Jago
1980 Z750
|
|
|
daveb666
|
| posted on 30/7/13 at 12:11 PM |
|
|
quote:
Originally posted by coozer
How about drilling holes in the mounting bar and threading the cables through to hide them?
Think that's what I am hoping to do - I'm starting mine tonight!
|
|
|
