ali f27
|
| posted on 17/3/12 at 05:02 PM |
|
|
duratec alternator
Hi thinking about just using standard modaeo alternator on my duratec engine its about getting parts when touring will it work or are they controlled
by the mondaeo ecu mine will have after market engine management
Cheers Ali
|
|
|
|
|
hootsno1
|
| posted on 17/3/12 at 06:57 PM |
|
|
have just bought one off these
A073 5 Groove Pulley Nippon Denso Kit Car Lightweight Alternator | eBay
If a little hammer won't fix it get a bigger hammer
|
|
|
big-vee-twin
|
| posted on 17/3/12 at 07:55 PM |
|
|
Depends where you going to mount it I initially used a Micra Alternator which is small but it wouldn't fit (first pic) I then opted for a tiny
ND alternator as previously said.
[img]
 
micra alternator - too big
[/img]
[img]
 
ND Alternator
[/img]
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
ali f27
|
| posted on 17/3/12 at 09:27 PM |
|
|
Hi is that the standard tensioner from the other side
|
|
|
big-vee-twin
|
| posted on 17/3/12 at 10:35 PM |
|
|
The tensioner is from a Ford Focus, it is spring loaded the original tensioner is not spring loaded.
[Edited on 17/3/12 by big-vee-twin]
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
