Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: what are the MUST HAVE warning lamps?
blakep82

posted on 19/1/12 at 12:13 AM Reply With Quote
what are the MUST HAVE warning lamps?

so far i've got
indicators (green)
main beam (blue)
brake fluid warning (red) - (which i'll have with a push button to test, no handbrake warning)
hazard light (red)
fog light (amber as per manual, though i've seen red in cars)

thats what i've already got installed

still to put in:
oil pressure (amber)
battery charge (red) - i've also got this going to my starter button so it comes on when the engines not already running, but will put this to a lamp too


speedo and other gauges will light up with head lights
i've got an LED fuel gauge with green amber and red lights, which isn't required, but i've got one


what have i missed?

I'm going to do them all with 10mm LEDs, i don't like normal bulbs, they look rubbish, in fact the only bulbs i'll have are the headlights

Description
Description



[Edited on 19/1/12 by blakep82]





________________________

IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083

don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!

View User's Profile View All Posts By User U2U Member
loggyboy

posted on 19/1/12 at 09:37 AM Reply With Quote
quote:
Originally posted by blakep82
fog light (amber as per manual, though i've seen red in cars)



Seems like you have all of them.
BTW All colours for telltales etc are effectively advisory -
Note 3: Tables A and B are for guidance only any method of identification or colours may be used providing this would cause no confusion to the driver.

[Edited on 19/1/12 by loggyboy]

View User's Profile View All Posts By User U2U Member
owelly

posted on 19/1/12 at 09:59 AM Reply With Quote
You may need to think about the charge light if you intend using an LED as the filament in the lamp makes the field current for the alternator.





http://www.ppcmag.co.uk

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
Peteff

posted on 19/1/12 at 11:07 AM Reply With Quote
Can you still have a beep instead of indicator warning lights ? Sorry to hijack but just thought of it.





yours, Pete

I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.

View User's Profile View All Posts By User U2U Member
loggyboy

posted on 19/1/12 at 11:17 AM Reply With Quote
quote:
Originally posted by Peteff
Can you still have a beep instead of indicator warning lights ? Sorry to hijack but just thought of it.


4.
There must be a audible or visual tell tale fitted to indicate the operation of any indicators such that would not cause confusion to the driver (see note 1)

View User's Profile View All Posts By User U2U Member
blakep82

posted on 19/1/12 at 11:52 AM Reply With Quote
quote:
Originally posted by owelly
You may need to think about the charge light if you intend using an LED as the filament in the lamp makes the field current for the alternator.


thats right, i might need to have a filament bulb hidden away, but if my standard grade physics is right, V=IxR or rather I=V/R, with 2 LEDs (charge and starter button) beight 12v leds with resisteros connected, i wonder if thats enough? i've got a filament warning lamp already, so like i said i don't mind hiding one away somewhere.

"Note 3: Tables A and B are for guidance only any method of identification or colours may be used providing this would cause no confusion to the driver."

i think that section is more to do with labeling the switches or lamps (ie having the hazrd symbol on them, or brake warning symbol) as that same section says just above it
"Identification of certain controls, tell tales and indicators is mandatory and is covered in other relevant sections. This section only applies to optional identification where provided."

if i was to look in every section, i'm bound to miss something! interestingly though, looking at the direction indicator section, no mention of the indicator warning lamps being green? i thought they had to be?





________________________

IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083

don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!

View User's Profile View All Posts By User U2U Member
loggyboy

posted on 19/1/12 at 11:58 AM Reply With Quote
I think the general concencus and the wording used throughout the manual is - 'cause no confusion to the driver'

If you have a light of any colour undewhich there is logo or wording stating Fog Light - thats not going to cause confusion.

You dont even need to have indicator warning lights at all (you can have a audible warning, or if you can see the front indicators themselves from the drivers sear), so i guess their view is it doesnt really matter if they are green, thats just whats considered 'standard'.

If you go back to the fog light section, it specfically states it can be any colour:

6.
Must be fitted with an operational “tell-tale” lamp (non-flashing) visible from the driving position
7.
Either the switch or tell tale must clearly indicate that operation relates to the Rear Fog lights (see Note 1).

Note 1: This may be achieved by an unlit pictogram (see section 33) or appropriate words, the tell tale may be any colour provided it cannot be confused with any other tell tale.


[Edited on 19/1/12 by loggyboy]

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.