karlak
|
| posted on 22/6/10 at 10:12 PM |
|
|
VR Sensor Pinto bracket
Does anyone have a bracket that they may have used on a Pinto for a VR sensor. I know there are several sites showing homemade ones, but I am bloomin
useless at making things like that.
It is the last bit I need to get my Megajolt up and running.
Cheers in advance and hope 
[Edited on 22/6/10 by karlak]
MK Indy - 2litre Duratec - Omex 600 - Jenvey throttle bodies - ETB DigiDash2
|
|
|
|
|
blakep82
|
| posted on 23/6/10 at 07:01 AM |
|
|
not cheap, but anything from here any use?
http://trigger-wheels.com/store/contents/en-uk/d11.html
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
karlak
|
| posted on 23/6/10 at 07:16 AM |
|
|
quote:
Originally posted by blakep82
not cheap, but anything from here any use?
http://trigger-wheels.com/store/contents/en-uk/d11.html
Thanks for the pointer... I think the issue there is that none of them are a direct fit. So I would end up bending, banging , grinding and swearing
to get it to fit. Oh, and have cost me loads of money for the pleasure 
Was hoping more for a direct bolt on to the pinto. Not sure that one exists, which is quite surprising, as if someone were to make up a batch I am
sure money could be made ?
Anyway, if anyone does have anything they have used in the past and is now surplus to requirements please let me know.
Cheers
MK Indy - 2litre Duratec - Omex 600 - Jenvey throttle bodies - ETB DigiDash2
|
|
|
RichardK
|
| posted on 23/6/10 at 09:22 AM |
|
|
If you get stuck I should be able to knock you one up, but you'd have to tell me the dia of your trigger wheel, I've got pictures in my
gallery (link on the banner below) but you'd have to drill the mounting holes.
Cheers
Rich
Gallery updated 11/01/2011
|
|
|
RichardK
|
| posted on 23/6/10 at 08:31 PM |
|
|
Didn't have anything to do tonight so here you are..
 
Your Megajolt Sensor Bracket
Hopefully you'll be able to weld them where they meet, have left a bit extra on at the ends so you may have the cut them shorter.
Cheers Rich
Gallery updated 11/01/2011
|
|
|
RichardK
|
| posted on 23/6/10 at 08:31 PM |
|
|
Looks better than the original version 
 
My Megajolt Sensor Bracket
[Edited on 23/6/10 by RichardK]
Gallery updated 11/01/2011
|
|
|
karlak
|
| posted on 27/6/10 at 06:35 PM |
|
|
Thanks Rich,
it has arrived safely. Many thanks for your help and hopefully will get it all fitted this week.
You are a true Gent and a Saint 
MK Indy - 2litre Duratec - Omex 600 - Jenvey throttle bodies - ETB DigiDash2
|
|
|
