scutter
|
| posted on 3/4/10 at 12:52 PM |
|
|
Pic's wanted
Can you all post up photo's of your fuse boxes? More interested in under scuttle installations, but all welcome. I want to change mine from
engine bay, but am open minded
I'll start with my old set up.
 
from front
ATB Dan.
The less I worked, the more i liked it.
|
|
|
|
|
Steve Hignett
|
| posted on 3/4/10 at 01:05 PM |
|
|
.JPG)
|
|
|
RichardK
|
| posted on 3/4/10 at 02:03 PM |
|
|
Its just a small fuse box to the right of the expansion bottle
Gallery updated 11/01/2011
|
|
|
robocog
|
| posted on 3/4/10 at 02:14 PM |
|
|
I'd keep em under there as they are easy to see at a glance and get to when its dark/wet and snotty...which is when they are most likely to be
needed to be got at
Fitted the extra fuses for EFI related gubbins under the dash (other side of bulkhead) and its a bitch to get to and requires a small childs hands to
actually remove/replace fuses without getting caught up in the jungle under there...
mind you the wiring under my dash is not the neatest and have been talking about tidying it up for over 3 years now..
The fuses for the EFI stuff will be going other side in engine bay (where yours currently are) when I do eventually get round to it
Too shy to show the under bonnet clutter/mess and bodges photos
Regards
Rob
[Edited on 3/4/10 by robocog]
|
|
|
Mark G
|
| posted on 3/4/10 at 03:53 PM |
|
|
This is mine, about 1/2 wired up at this stage but you get the idea.
|
|
|
RK
|
| posted on 3/4/10 at 03:53 PM |
|
|
I like them where they are. Mine are under the dash, mounted on the inside of the firewall, and a pain to get to. Was thinking of moving them to the
outside.
|
|
|
rgrs
|
| posted on 3/4/10 at 05:45 PM |
|
|
Here's Mine.
Roger
 
wiring1
[Edited on 3/4/10 by rgrs]
|
|
|
afj
|
| posted on 3/4/10 at 06:05 PM |
|
|
mine
 
Rescued attachment our photos 111.jpg
eerrrrrrrrrrrrrrrr
|
|
|
scutter
|
| posted on 3/4/10 at 10:00 PM |
|
|
Cheers folks, I was after a cleaner look in the engine bay, but that seems to most logical placement.
ATB Dan.
The less I worked, the more i liked it.
|
|
|
omega 24 v6
|
| posted on 3/4/10 at 11:30 PM |
|
|
Have look in my archive. I have mine under the dash/scuttle. But it is a hand made loom.
Here
here
here
here
If it looks wrong it probably is wrong.
|
|
|
.JPG)
