Board logo

Where can I get these battery connections?
speed8 - 28/1/07 at 04:29 PM

I could do with getting them tomorrow so I can crack on with a few things.

One is a right angle connection off a bike battery and the other uses an 8mm bolt to hold it in place on the starter relay.

Cheers


battery1
battery1


battery2
battery2

RazMan - 28/1/07 at 04:45 PM

Premier Wiring does a range of battery terminal connectors.

stevebubs - 28/1/07 at 08:04 PM

autosparks are worth a shot....

bigrich - 28/1/07 at 10:58 PM

just carefully unpick the ones you have Andy. I did this with no probs on my last build

speed8 - 29/1/07 at 09:56 AM

quote:
Originally posted by bigrich
just carefully unpick the ones you have Andy. I did this with no probs on my last build


I like it... lo-cost and simple. Wasn't sure if I would destroy them in the process.

RazMan - 29/1/07 at 10:15 AM

Might be a good idea to solder the used ones back on though - they might not grip reliably when second hand

02GF74 - 29/1/07 at 10:55 AM

quote:
Originally posted by bigrich
just carefully unpick the ones you have Andy.


tha't worth a go; maybe using a small drill to drill out the wire first, then pull out the remaing strands; then a screwriver to prise the tabs open?