Would like to use this one:
http://cgi.ebay.co.uk/ws/e
BayISAPI.dll?ViewItem&item=8074991299&ssPageName=MERC_VI_ReBay_Pr4_PcY_BIN_Stores_IT
but for homologation i will need a E marked normal black one, anyone knows where to buy
Tks
I used that same LED one but housed it in an E-marked larger black housing. £2.50 from a trailer and caravan suppliers. I removed the original bulb
holder and bonded the LED light in place.
Steve
Like this one.Number Plate Light
quote:
Originally posted by Howlor
Like this one.Number Plate Light
I bought one like that for £1.99 at a show anyway, why buy it on ebay?
if someone from here sell it for me?
can aquire it for me?
the only thing they have here is a postmen sow hees the ones that delivers me the smiles.
spain isn´t as DIY as england.
also many people have no idea of things like a caravan wich almost don´t exists here in spain..
i cant see where the light comes from on that linky housing?
who is going to do me the favor of sending ones?
will pay good! (paypall)
Tks
p.s what about this: "Will post to United Kingdom."
[Edited on 22/6/06 by tks]
quote:
Originally posted by Peteff
I bought one like that for £1.99 at a show anyway, why buy it on ebay?
quote:
Originally posted by tks
is going to do me the favor of sending ones?
[Edited on 22/6/06 by tks]
and what about if i would give you a fiver for finding me one?
or wasn´t it you who had that caravan shop nearby?
problem is i need to buy the leds one and a black one, the blackone will be during Spanish SVA with the original bulb in it.
when i´m then sick of it i will change it to leds
Tks
should be someone on here wich aquire me one?
in return i offer lasercut service...
The parts shop across the road has them for under £5 I could pick one up for you or there's one
here for £1.99
[Edited on 22/6/06 by Peteff]
I bought one of those LED units and it was rubbish so i sent it back - it wouldn't illuminte the whole number plate. I nopw have two lite-n-boltz for my number plate.
I didn't think a number plate light needed to be E marked. There are no mandatory angles of visability, etc associated with it. I thought the
only requirements were that it is a white light and that the site of the registartion plate is illuminated (which means you can fit as many lamps as
necessary to do so) ooh and it should turn on and off with the side lights.
[Edited on 22/6/06 by silex]
the problem is homologation is rubbish here to!
sow i come with special things like that they will never let me pass.
pete is that unit for 2 of them ligtning from the side or one from above?
don't like the unit very much..
have seen one on ebay
they are what i need altough a bit pricey
NEW
LINKY
Cheers,
Tks
if your on the corner is much the same send it off and i will do some laser jobs for ya and offcourse paypall you..
laserjobs can be nice logo's made out of polished stainless etc..
[Edited on 22/6/06 by tks]
I'll check the other local shop tomorrow for you, the one I have is like the one in your ebay link. Postage and the price of the light would be o.k. I only have one shining down on the number plate but you could mount one at either end both shining in. If you want I'll sort postage out tomorrow and you can paypal me. There's another type here
For the original 3 LED numberplate light listed,
You may find its cheeper or an equvalent price to buy a UV or blue light and 10 Superbright While LED's and swap them. You could probably get 2
for the same price and have some LED's spare.
I used 2 to fully illuminate the rear numberplate on the Tin-Top, looks good.
hope you aquire me a nice one (like on my last ebay link) wich is a bit cheaper.
as soon as you say a total amount i will paypall you
regards,
Tks
I got this one, send me your address in a U2U and I'll sort out the postage and get it off to you ASAP tks. That's a scan of the actual one,
£2.75 so it shouldn't be too bad with postage as it's light .
[Edited on 23/6/06 by Peteff]
Rescued attachment numlight.jpg