Anyone know how far from vertical we can get away with with respect to the foglight? Mine is 22 degrees off vertical as shown in my quick sketch below.

[Edited on 24/5/06 by jamesbond007ltk]
Rescued attachment Fog angle.jpg

It has to be vertical - they check it with a big L-shaped gauge.

David

None!
it has to be vertical (for SVA)

It has to be vertical so i guess 1 or 2 deg tolerance max. You wont get away with your pic.

i mounted mine from a bracket that is fastened to the chassis. Later i can move to wherever i want.

Others have fabricated a bracket behind so they can mount in same position as you are indicating.

i bought a light support from tiger, this was for a traditional rear light setup. cut the centre out of it, bonded the 2 parts back together and painted it.

looks neet and purpose made, and all for a tenner. also sva proof

ditch

svc sell a angled light holder take a look in my archive and see if you can make it out its the the fog one is the same as the others just the other way around

ta chris

I used the s-v-c carbon light mountings and I would say that my fog light is probably 10 degrees off the vertical mounted on my Indy rear panel. Passed SVA at Beverley at this but I suppose it depends on the tester/station.