Board logo

EEC IV ecu pin outs and power distribution
full_throttle - 28/4/05 at 04:00 PM

Hi everyone.

I'm having a spot of bother with a project car. I'm putting the 2.9i 4x4 engine into a fiesta, and I've come to the stage to wire in the ECU.

Does any one have a wiring diagram of the power distribution, ie what relays are involved in powering up the fuel injection system and also a wiring diagram for the EEC IV module?

The whole engine and ecu / loom is from a 1988 Sierra XR4x4 2.9EFi with ABS.

I thought this would be the best place to ask for help as it seems a lot of people have a fair amount of experience with this engine/ecu on this website.

Many thanks in advance,
Dave.

[Edited on 28/4/05 by full_throttle]

ReMan - 28/4/05 at 10:19 PM

quote:
Originally posted by full_throttle

I thought this would be the best place to ask for help as it seems a lot of people have a fair amount of experience with this engine/ecu on this website.

Many thanks in advance,
Dave.

[Edited on 28/4/05 by full_throttle]

I may be wrong but I think the most experience is in taking it out and or chucking away the ecu and ABS

mangogrooveworkshop - 28/4/05 at 10:58 PM

please u2u your email for the rest of the info

Thanks to mad4x4 for this

[Edited on 28-4-05 by mangogrooveworkshop] Rescued attachment wirethumb.jpg
Rescued attachment wirethumb.jpg

full_throttle - 29/4/05 at 07:09 AM

Many thanks for that. I tried the u2u feature but it just jumps me to the top of the page!?

I've sent an email to you with my email address.

Regards
Dave.

mad4x4 - 4/5/05 at 09:40 PM

Have a look at http:\www.xr2zetec.co.uk



[Edited on 4/505/05 by mad4x4]

[Edited on 4/505/05 by mad4x4]