Valtra
|
| posted on 10/5/13 at 08:06 PM |
|
|
Edis query
This is a common Edis diagram from the net , however I've read reports on other forums which say 10 and 12 should be transposed . My coil plug
would also bear that theory out as the wire colours would match
 
Description
"If it looks like it works and it feels like it works, then it works"
|
|
|
|
|
big-vee-twin
|
| posted on 10/5/13 at 08:30 PM |
|
|
Doesn't really matter that much, just make sure you have the ignition leads in the right firing order
1&4 on coil A 2&3 on coil B or visa versa.
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
Valtra
|
| posted on 10/5/13 at 08:51 PM |
|
|
quote:
Originally posted by big-vee-twin
Doesn't really matter that much, just make sure you have the ignition leads in the right firing order
1&4 on coil A 2&3 on coil B or visa versa.
ok I'll make sure they are fitted as the numbers printed on the top of the coil pack say 
"If it looks like it works and it feels like it works, then it works"
|
|
|
the1theycallthe1
|
| posted on 2/6/13 at 10:16 AM |
|
|
Yeap agree - on my previous build i didn't bother....
|
|
|
