carl M
|
| posted on 20/3/13 at 12:55 PM |
|
|
Fuel Rail - GSXR TB's
Hi,
Finally getting round to my finishing my Zetec FI conversion. (GSXR TB's + Megasquirt)
Has anyone got any god idea's for a fuel rail, I guess I have 2 options;
1. Use current set up but get new longer tubes made between plastic housings
2. Throw current set up away and use a new fuel rail.
Does anyone on this board make / sell anything suitable. (I'd rather that they go to Jenvey etc)
Thanks
Carl
p.s. not fixed on the above, any other genius idea's welcome 
|
|
|
|
|
r1_pete
|
| posted on 20/3/13 at 01:07 PM |
|
|
Flak Monkey, David, was doing some at one bit, checkout his websete kitcar services, or try a u2u to him.
Fuel rail blank extrusions are getting easier to buy over here now, why not try making your own?
|
|
|
FASTdan
|
| posted on 20/3/13 at 05:21 PM |
|
|
Hi,
If its the standard aluminium tube sections (10mm dia, 2 x O-rings) as found on early GSXR1000/1300 I make them for my own spacing kits. 12mm longer
than standard for a Zetec. I can also extend the steel T-piece version.
Drop me a U2U.
NEW danST WEBSITE NOW LIVE! Bike carbs, throttle bodies and more......
http://www.danstengineering.co.uk/
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
will121
|
| posted on 20/3/13 at 07:20 PM |
|
|
quote:
Originally posted by FASTdan
Hi,
If its the standard aluminium tube sections (10mm dia, 2 x O-rings) as found on early GSXR1000/1300 I make them for my own spacing kits. 12mm longer
than standard for a Zetec. I can also extend the steel T-piece version.
Drop me a U2U.
thats basically what i done and easy way if you also looking to use the standard injectors
|
|
|
Andybarbet
|
| posted on 20/3/13 at 09:46 PM |
|
|
Here'show i did mine
 
centre fuel rail
Also a thread with a few more detailed pictures of what i have done:
http://www.locostbuilders.co.uk/viewthread.php?tid=175630
Still need to finish the connecting barb for the fuel pipe but havent had much time lately so it willhave to wait until work calms down a bit 
Give a man a fish & it will feed him for a day, give him a fishing rod & you've saved a fish.
|
|
|
