wonderfulweasel
|
| posted on 30/11/09 at 11:13 PM |
|
|
DCOE manifold to ITB adaptors
I'm just starting the conversion to GSXR600 throttle bodies that many on here have done. I've read through a lot of the previous
information on the subject and like the idea of using a Weber DCOE manifold with adaptors to connect the TBs.
Several people seem to have made their own adaptors. I don't have the capability to do this myself. 
Does anyone on here produce them, or could point me in the right direction for someone that does?
Thanks
|
|
|
|
|
flak monkey
|
| posted on 1/12/09 at 07:15 AM |
|
|
IIRC the standard gsxr 750 flanges on the head of the bike will fit straight onto a weber inlet manifold. A bike breaker should be able to sort you
out with some.
Or I could make you some billet adaptors, trouble is they are a lot of work and you would nearly be looking at the cost of having a manifold made by
boggs to be honest.
Sera
http://www.motosera.com
|
|
|
fatbaldbloke
|
| posted on 1/12/09 at 02:36 PM |
|
|
If you want drawings of the adaptors I made for exactly the same conversion you're considering (photos on my website) I can send them if you U2U
an address.
Cheers, FBB
|
|
|
flak monkey
|
| posted on 1/12/09 at 02:39 PM |
|
|
These are the ones I made for my pinto, very similar to yours FBB.
http://www.locostbuilders.co.uk/upload/TB%20adaptor.JPG
 
TB Adaptor
[Edited on 1/12/09 by flak monkey]
Sera
http://www.motosera.com
|
|
|
wonderfulweasel
|
| posted on 1/12/09 at 06:55 PM |
|
|
Thanks chaps. I'm after a locost option really, so will try to find some 750 mounting flanges.
|
|
|
wonderfulweasel
|
| posted on 2/12/09 at 10:08 PM |
|
|
Does anyone know if it's only the 750 flanges that will fit, or will those of other sizes be similar?
Thanks in advance.
|
|
|
