Board logo

Fuel Rail - GSXR TB's
carl M - 20/3/13 at 12:55 PM

Hi,

Finally getting round to my finishing my Zetec FI conversion. (GSXR TB's + Megasquirt)

Has anyone got any god idea's for a fuel rail, I guess I have 2 options;

1. Use current set up but get new longer tubes made between plastic housings

2. Throw current set up away and use a new fuel rail.

Does anyone on this board make / sell anything suitable. (I'd rather that they go to Jenvey etc)

Thanks

Carl

p.s. not fixed on the above, any other genius idea's welcome

r1_pete - 20/3/13 at 01:07 PM

Flak Monkey, David, was doing some at one bit, checkout his websete kitcar services, or try a u2u to him.

Fuel rail blank extrusions are getting easier to buy over here now, why not try making your own?

FASTdan - 20/3/13 at 05:21 PM

Hi,

If its the standard aluminium tube sections (10mm dia, 2 x O-rings) as found on early GSXR1000/1300 I make them for my own spacing kits. 12mm longer than standard for a Zetec. I can also extend the steel T-piece version.

Drop me a U2U.

will121 - 20/3/13 at 07:20 PM

quote:
Originally posted by FASTdan
Hi,

If its the standard aluminium tube sections (10mm dia, 2 x O-rings) as found on early GSXR1000/1300 I make them for my own spacing kits. 12mm longer than standard for a Zetec. I can also extend the steel T-piece version.

Drop me a U2U.


thats basically what i done and easy way if you also looking to use the standard injectors

Andybarbet - 20/3/13 at 09:46 PM

Here'show i did mine
centre fuel rail
centre fuel rail

Also a thread with a few more detailed pictures of what i have done:
http://www.locostbuilders.co.uk/viewthread.php?tid=175630

Still need to finish the connecting barb for the fuel pipe but havent had much time lately so it willhave to wait until work calms down a bit