chris_harris_
|
| posted on 7/7/08 at 09:01 PM |
|
|
Carbon fibre mirrors
Hi Guys looking for some nice mirrors and came across
THESE
anyone used them for sva, or similar ones.
Thanks
Regards Chris
|
|
|
|
|
omega0684
|
| posted on 7/7/08 at 09:23 PM |
|
|
i would doubt that they would meet sva requirements, i have the racetech ones and you can't see jack out of them
|
|
|
russbost
|
| posted on 7/7/08 at 09:52 PM |
|
|
They look very similar to the carbon look ones I do on ebay (except they are real carbon fibre, if that's to be believed) - which I would say
won't pass SVA. I'd also point out they are in Taiwan & he has low feedback
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Dusty
|
| posted on 7/7/08 at 10:48 PM |
|
|
Not going to be big enough. Have to accommodate a rectangle 40mm high by 70mm wide and a line vertical to the rectangle of 70mm.
 
Rescued attachment mirrorsva.jpg
|
|
|
simoto
|
| posted on 7/7/08 at 11:22 PM |
|
|
Brill that helps me too, thanks.
striker/blade now complete, thanks to all on this site.
|
|
|
scoop
|
| posted on 8/7/08 at 08:48 AM |
|
|
I got some CBR ones which were in carbon effect e marked and big enough. They were from a guy on ebay from Canada.
|
|
|
Davey D
|
| posted on 8/7/08 at 09:13 AM |
|
|
Im looking for some carbon mirrors, but dont know which ones to get.
At the newark kitcar show i think it was the EuropeSpares stand, they had some carbon SPA mirrors, and i thought the quality looked absolutely
crap
then whilst browsing around the manufacturers stands i was looking at the MK stand, and there was a white Indy with carbon mirrors which looked really
nice, but when i asked one of the blokes on the MK stand about them he didnt know where they was from, and then glared at me like he was telling me to
clear off  
|
|
|
chris_harris_
|
| posted on 8/7/08 at 09:25 AM |
|
|
Looks like its back to the drawing board then. May have to go down the bike mirror route for the sva and then change them after. Need to find some
with single hole fixing then. Thanks for all your input guys. I'll let you know how i go.
Any help on something
likeTHIS instead.
[Edited on 8/7/08 by chris_harris_]
|
|
|
