darrenga
|
| posted on 26/1/07 at 09:34 PM |
|
|
bulk head
anybody got pics of how they did there bulk head
|
|
|
|
|
Kev99
|
| posted on 26/1/07 at 09:49 PM |
|
|
If u mean the battery tray area I used the GPR panel MK suppled
 
Battery tray
|
|
|
Humbug
|
| posted on 26/1/07 at 11:03 PM |
|
|
Not sure how well you can see it here, but the bulkhead and battery shelf is one piece of ali folded, and riveted to the front of the top footwell
rails. The sides are folded up to make it easier to locate the bonnet. To fix it to the scuttle I used sealant and dome head bolts
[Edited on 26.01.2007 by Humbug]
 
Rescued attachment 2005-01-30 ST 4.JPG
|
|
|
darrenga
|
| posted on 27/1/07 at 07:24 PM |
|
|
did it fit properly kev or did you have to force it to fit,thats what i have been told dont know if its true
|
|
|
Kev99
|
| posted on 27/1/07 at 08:07 PM |
|
|
It fits fine after a bit of trimming up. The lip on the front edge overhangs by about an inch but I just removed it and trimmed it back to the
bulkhead. I also had to trim around one of the fireblade cradle mounts as well
 
Battery tray 2
 
Battery tray 3
|
|
|
