davrus
|
| posted on 22/8/06 at 09:53 PM |
|
|
bonnet scoop ideas
still after some ideas for my bonnit , air filter sits about 4 inchs out the bonnit , want to build a scoop of some sort to cover it , any ideas and
pics would be great
Many thanks
 
Rescued attachment bon2.JPG
|
|
|
|
|
zetec7
|
| posted on 23/8/06 at 04:57 PM |
|
|
Personally, I'd be looking for a teardrop-shaped bulge, and put round holes (with screening) on the sides of it, leaving the front of the bulge
closed to keep out rain, grit, etc. Not sure where you'd find one, but I have seen power bulges like this advertised somewhere.
|
|
|
02GF74
|
| posted on 25/8/06 at 02:39 PM |
|
|
take a llok at the bulge I sold (in for sale- maybe a couple weeks ago) to give you an idea of what I would use if it were me.
|
|
|
907
|
| posted on 2/9/06 at 07:21 AM |
|
|
Hi.
That shape, a sort of open ended teardrop, would be dead easy to form in ally.
Fix in place with M4 stainless button heads?
The bulges in the side of my nose cone are that shape, and I formed those by pushing it over a 50mm dia bar.
A length of exhaust pipe would do.
If you fancy a go U2U me
hth
Paul G
|
|
|
