t11
|
| posted on 20/3/14 at 06:54 PM |
|
|
How to remover wax
Hi all, I'am making a splitter for my car and made a mould from ply wood, I've used the correct wax but have a few lumps so how can I
remove the wax to start again.......thanks
|
|
|
|
|
locost 7 k
|
| posted on 20/3/14 at 06:57 PM |
|
|
Maybe a silly idea but a heat gun and a rag might work?
|
|
|
steve m
|
| posted on 20/3/14 at 06:58 PM |
|
|
from memory i used white spirit, but try a tester first !!
steve
Thats was probably spelt wrong, or had some grammer, that the "grammer police have to have a moan at
|
|
|
nero1701
|
| posted on 20/3/14 at 07:06 PM |
|
|
i once dated a girl(many years ago) and we spilled hot wax on her parents sofa..
boiling water worked
|
|
|
joneh
|
| posted on 20/3/14 at 09:11 PM |
|
|
I once scraped the polish and wax off a wardrobe prior to painting by dragging a Stanley knife blade over it.
|
|
|
owelly
|
| posted on 20/3/14 at 09:44 PM |
|
|
Lay brown paper over the wax and iron it. It should leave a nice smooth finish. It works on parents sofas too.
http://www.ppcmag.co.uk
|
|
|
twybrow
|
| posted on 21/3/14 at 10:57 AM |
|
|
Acetone... It dissolves mould wax and is used throughout the industry to strip wax from a mould/plug.
Are the lumps that you can feel in the mould or in the wax? If they are in the mould, just remove the wax locally for the repair, rather than from the
whole mould.
|
|
|
Not Anumber
|
| posted on 21/3/14 at 01:35 PM |
|
|
syringing, well it works for ear wax
|
|
|
kj
|
| posted on 21/3/14 at 04:22 PM |
|
|
This works well
[img]
 
Description
[/img]
Think about it, think about it again and then do it.
|
|
|
