Cadburys Man
|
| posted on 18/1/14 at 06:07 PM |
|
|
7 Style Front Grille Options?
So i'm wanting to remove the hamster cage front grille and replace it with something a bit more pleasing to the eye and i've found this on
fleabay.....................
http://www.ebay.co.uk/itm/Caterham-Nose-Cone-Grille-7-Logo-Chrome-Plated-Brand-New-UK-Made-/300906920554?pt=UK_CarsParts_Vehicles_CarParts_SM&fits
=Car+Make%3ACaterham&hash=item460f733a6a
Can't seem to find anything else  Does any of u guys know of any other options??
Daz.
Stuart Taylor ZX9-R Locosaki
|
|
|
|
|
40inches
|
| posted on 18/1/14 at 06:10 PM |
|
|
This is what I used:
ebay
|
|
|
SPYDER
|
| posted on 18/1/14 at 07:40 PM |
|
|
I used stainless mesh similar to the previous poster but of the kind that looks like diamonds rather than squares. It had a matt finish which you
could polish or spray black like I did. I'm not keen on the "7" logo grilles. Looks like you're trying too hard. What colour
is your car? Maybe a "7" logo grille in black rather than chrome might suit.
|
|
|
doobrychat
|
| posted on 18/1/14 at 07:54 PM |
|
|
I used black diamond mesh Grille as i didn't like the open type and all them stones flying into my Radiator..
|
|
|
keith777
|
| posted on 18/1/14 at 08:13 PM |
|
|
If your worried about stones you could use the black mesh with the seven style one in front
cheers Keith
|
|
|
Not Anumber
|
| posted on 18/1/14 at 09:17 PM |
|
|
Ive kept the original black mesh grille and fitted the ' 7' grille. looks fine and protects the rad
|
|
|
40inches
|
| posted on 18/1/14 at 11:05 PM |
|
|
quote:
Originally posted by SPYDER
I used stainless mesh similar to the previous poster but of the kind that looks like diamonds rather than squares. It had a matt finish which you
could polish or spray black like I did. I'm not keen on the "7" logo grilles. Looks like you're trying too hard. What colour
is your car? Maybe a "7" logo grille in black rather than chrome might suit.
That's what I have apparently 
|
|
|
renetom
|
| posted on 19/1/14 at 08:06 AM |
|
|
grille
Hi
You can always make your own.
I made ours from 2 flat aly strips 1/8" thick painted
black and stainless steel tube (which is light)
pop riveted to the strips.
You can design whatever you want.
 
grille
|
|
|
gavin174
|
| posted on 19/1/14 at 12:30 PM |
|
|
why not get something laser cut from stainless...
the choices are endless!!
[Edited on 19/1/14 by gavin174]
http://www.essexkitcarclub.com
|
|
|
