Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: My Winter workload
r1_pete

posted on 4/11/12 at 08:21 PM Reply With Quote
My Winter workload

Plan was to rebuild the front end over the winter and convert to covered headlights, will be replacing the lower panel, but didn't expect all this filler. Its nearly 20mm thick in places, clearly a front end shunt at some time, hope the neighbors won't mind all the hamering, as I re shape this lot, might actually get to use the TIG set too, which has been in its plastic wrappings since last Christmas,,,,,,,


Front1
Front1


Front2
Front2


[Edited on 4/11/12 by r1_pete]

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
mookaloid

posted on 4/11/12 at 09:07 PM Reply With Quote
looks like a big jobbie - good luck





"That thing you're thinking - it wont be that."


View User's Profile E-Mail User View All Posts By User U2U Member
austin man

posted on 4/11/12 at 09:16 PM Reply With Quote
will be worth it in the end





Life is like a bowl of fruit, funny how all the weird looking ones are left alone

View User's Profile View All Posts By User U2U Member
steve m

posted on 4/11/12 at 09:42 PM Reply With Quote
Drooooooooooooooooooolllllll

I am VERY envous,

my fav car of all time, by far

View User's Profile View All Posts By User U2U Member
Canada EH!

posted on 5/11/12 at 12:18 AM Reply With Quote
With that rust I might be looking at new panels, a friend has had to do it twice due to collisions not his fault.
View User's Profile View All Posts By User U2U Member
r1_pete

posted on 5/11/12 at 10:36 AM Reply With Quote
Thanks guys...

The metal isn't too bad, just crumpled under all that filler, its amazing as I tested it with a magnet before buying!!, new panels are so expensive, and poor quality now, I have got a new lower/hinge panel which is pressed using original tooling so should be somewhere near. But the fit on the non OE panels is not very good at all, I did the back wings and boot floor last winter and spent more time re working joints than anything else.....

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
Dingz

posted on 5/11/12 at 02:01 PM Reply With Quote
Still think they are amazing, when I was an apprentice we went ot the factory to see them being built. The bare steel bodies came in from Fisher on the back of open lorries, if it was raining they were covered in rust, they were given what seemed to be a cursory rub down before they went into the paint shop. We couldn't beleive it and we were from Vauxhall in the late 60s! Suprised many of them survived so long.





Phoned the local ramblers club today, but the bloke who answered just
went on and on.

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.