dunk3
|
| posted on 19/3/11 at 10:22 PM |
|
|
what to cover MDF with
I have made a boot cover for my mk indy out of MDF, what is the best thing to cover it with. or can you paint it,
[Edited on 19/3/11 by dunk3]
|
|
|
|
|
BenB
|
| posted on 19/3/11 at 10:27 PM |
|
|
very thin foam from Woolies and some vinyl works for me.
|
|
|
mad4x4
|
| posted on 20/3/11 at 01:12 AM |
|
|
I found that a camping mat from the hike shop is a good hi-density foam that works well under vinyl.
Used this under the vinyl on my dash and it is firm but squashy and can be shaped easily and is cheap.
Scot's do it better in Kilts.
MK INDY's Don't Self Centre Regardless of MK Setting !
|
|
|
snapper
|
| posted on 20/3/11 at 06:46 AM |
|
|
Slightest bit of damp and MDF blows, I would recomend marine ply for your cover.
I have used camping mat for firmer feel, yoga mat for softer, covered with vinyl
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
Daddylonglegs
|
| posted on 20/3/11 at 07:10 AM |
|
|
I agree with snapper, MDF is terrible for taking on moisture! Either marine ply or at the least WBP (Weather & Boil Proof - i.e. external) or
maybe normal but treated first.
HTH
It looks like the Midget is winning at the moment......
|
|
|
Hammerhead
|
| posted on 20/3/11 at 09:12 AM |
|
|
Out of interest, why are people covering with foam? Why not just vinyl straight on marine ply?
|
|
|
JoelP
|
| posted on 20/3/11 at 11:00 AM |
|
|
mdf is so bad with moisture that even paint blows the edges!
|
|
|
Mr Whippy
|
| posted on 20/3/11 at 11:07 AM |
|
|
you could wrap the MDF in cling film and tape before covering to help keep out moisture
Fame is when your old car is plastered all over the internet
|
|
|
Antnicuk
|
| posted on 20/3/11 at 11:27 AM |
|
|
quote:
Originally posted by Hammerhead
Out of interest, why are people covering with foam? Why not just vinyl straight on marine ply?
It gives a nice padded OEM feel. I did it with my dash.
600 BHP per ton, Stylus Brought back from the dead! Turbo Rotary Powered!
|
|
|
blakep82
|
| posted on 20/3/11 at 11:55 AM |
|
|
i've got a rabbit hutch/hen house, covered with about 1.5 square meters of MDF covered in roofing felt, was fine when it went on, its now
doubled in thickness and nearly too heavy to lift with hand.
use marine ply instead!
MDF is basically paper
[Edited on 20/3/11 by blakep82]
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
stevegough
|
| posted on 21/3/11 at 07:45 PM |
|
|
I agree with all that's been said about MDF - I made a Dovecote out of MDF last summer - and I gave it three coats of yacht varnish, then the
outside was further primed, undercoated and 2 coats of lovely powder-blue paint. The blue bit is ok at the moment, but the panels (floors which had
just yacht varnish) have swollen quite a bit.
My boot cover is made with varnished ply, then covered with just black Vinyl.
 
Description
Luego Locost C20XE.
Build start: October 6th 2008.
IVA passed Jan 28th 2011.
First drive Feb 10th 2011.
First show: Stoneleigh 1st/2nd May 2011.
'Used up' first engine may 3rd 2011!
Back on the road with 2nd engine may 24th
First PASA mad drive 26/7/11
Sold to Mike in Methyr Tydvil 19/03/14
|
|
|
