Stuart_B
|
| posted on 28/5/09 at 06:54 PM |
|
|
Bubble screen
hi all, i fitted my bubble screen this afternoon, and took it for a test drive and what a differance, it is so much better, i can were just sunglass
and i am fine at the speeds where i could not be for long before. as well i can here my great exhaust note, not just a load of wind noise and a little
bit of noise, now i can here it all.
well here are some pics, i have got to make a new dash, as i have a koso dash to fit, new savavge switch's and oil pressure and possible a built
in sat nav.
 
bubble screen fitted
 
bubble screen fitted 1
 
bubble screen fitted 3
 
bubble screen fitted 4
 
bubble screen fitted 5
what do you think?
thanks
stuart
black mk indy, 1.6pinto on cbr600 bike carb's.
|
|
|
|
|
LBMEFM
|
| posted on 28/5/09 at 06:56 PM |
|
|
Sexy
|
|
|
madteg
|
| posted on 28/5/09 at 07:51 PM |
|
|
Second that they are brill
|
|
|
omega0684
|
| posted on 28/5/09 at 08:14 PM |
|
|
fan-dabby-dosey, is it the plastic one of ebay?
|
|
|
Stuart_B
|
| posted on 28/5/09 at 08:18 PM |
|
|
yes, it is the fiberglass one from ebay.
just need to get some stainless steel stone gaurds as well.
stuart
black mk indy, 1.6pinto on cbr600 bike carb's.
|
|
|
omega0684
|
| posted on 28/5/09 at 08:44 PM |
|
|
i may have some in the garage what size do you need?
|
|
|
Stuart_B
|
| posted on 28/5/09 at 08:49 PM |
|
|
i got some of obp, but i have put the rear arches on the wrong way around the teh angle is wrong, so i was going to get them customed made, as my mate
said if i draw a card template he will make it for me for free, as he needs my help a bit of the time, with jetski's, and he will be build a
seven soon as well.lol
but thank you very much for the offer.
stuart
black mk indy, 1.6pinto on cbr600 bike carb's.
|
|
|
GH1985
|
| posted on 28/5/09 at 09:07 PM |
|
|
Like the screen, where can I get one from ?
Just been searching on e-bay, but can't find it.
Graham
|
|
|
Danozeman
|
| posted on 28/5/09 at 09:11 PM |
|
|
Looks good mate. Has it really made that much difference??
Mine dont do alot.
These are they
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
RK
|
| posted on 28/5/09 at 10:24 PM |
|
|
Looks nice! Did you make or buy those nice sill guards?
|
|
|
Stuart_B
|
| posted on 29/5/09 at 08:13 AM |
|
|
yes, i think it was, but as i am short, it all goes straight over my head, well a little bit hits my hair, but that is about it.
i think i have seen you car at a show and you stepping out, are you faily tall?
as well the sill gaurds are home made, on my home made bender, out of stainless, and poilsed on the poilshing mop.
cheers
stuart
black mk indy, 1.6pinto on cbr600 bike carb's.
|
|
|
Echidna
|
| posted on 7/6/09 at 07:34 PM |
|
|
A very similar to this in carbon will cost 110GBP plus shipping. I will post some pics soon, for anyone interested just send a U2U or email me at the
address you read at my signature.
kitCARBON is the new carbon composite parts company specialising in kitcar parts. We can make parts to order in carbon, carbon/kevlar, kevlar,
texalium and more!
For any question, just U2U or email me at
theodragonas@gmail.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
.jpg)
