Hi,

Can you all post pictures of your rear parcel shelves. I need to get some inspiration.

Ian.

mine quite small as i have a massive fuel tank under there



luggage areamk

Description

Ply, foam, exterior vinyl, staples and glue.

Hinges like a saloon car and a simple lock - held down with small angle section of ally pop riveted to the chassis and then screwed up underneath into the ply...

12mm MDF, radiused edge with a router, covered with black vinal. screwed in place from below.

Took all of about 1/2 hour to make and made from stuff that was laying around the garage.


[img]http://[/img]

And another

here,s mine
Rescued attachment P1010020 540x404.JPG

here's mine - 1/4" ply with routered radius all round then covered with black vinyl. Seperate hinged section with barrel lock giving access to the fuel filler.
Rescued attachment latest-3.jpg

Ali panel
Rescued attachment DSCN0010.jpg

Shameless hijack but how are these panels fastened on, particularly at the rear?

not a hijack at all, that was going to be my next question....

has anyone found any good metal hooks that can hook under the rear tube that creates the top rear panel shape?