Afternoon all

After much consideration i'm leaning towards using these catches for retaining my bonnet.

I was considering placing them on the top of the bonnet as opposed to the side.

Has anyone done this and would anyone whose used these for bonnet catches in any format kindly post some pictures of how they've fitted the eyelet rods inside the engine bay area.

Thanks all
Nigel

Not fitted on a 7, but on a Spire GTR - take a look at www.blackbird-gtr.co.uk, and look at the body page. Might give you a bit of an idea how we did it. (well, how swmbo's dad did it. I helped. A bit.)

HTH,


Vince

(looking at your archive pics) vinny nice to see im not the only one mad enough to build a car without a garage good on you mate. i to had a shanty town for a year till the wind got under it and all 3 gazebos went flying down the road . i sooo want one of those spire cars maybe a next build or maybe i could come and take some dims with the laptop and cad

[Edited on 17/12/07 by westcost1]

My catches are fitted in the conventional manner but have proved very easy to operate and never failed.
Heres some pics








John

this may help..

http://www.locostbuilders.co.uk/viewthread.php?tid=33622&page=1&contribmessage=none

I bonded mine in to hide the fasteners and painted them give a flush look.
Rescued attachment Aerocatch.jpg