Need some insparation for my boot cover on a Westfield.

It has no boot box (to store anything it) but i still need to cover the boot box area and it must be accecable/easy to open/remove.

You photo's very much apreciated plus materials used

[Edited on 24/2/07 by Major Stare]

I want to see the nightmare!!!

i'll take a pic for you in the morning... but it's 6mm ply with a big hole cut in it, chrome plated hinges from b&q, a camping roll mat for padding and then eventually it will be vynil covered. also a couple of budget locks to get into it/ make secure ish

Work so far......

boot lid 1
[img][/img]


hth
john

edited to add photo's.

[Edited on 25/2/07 by Marlon]

I made an insertable ally box, held in with self tappers
Rescued attachment Boot Compartment.jpg

..and with the lid on
Rescued attachment RollBarBlue.jpg

And who says our cars aren't practical!

We made our own boot box from a couple of strips of aluminium and some thin plywood covered with carpet. It makes use of the maximum amount of space in the rear of the Indy and can hold quite a lot. Best of all, it can be easily removed with just four screws.

Have a look here for details.

Phil

Finished bootbox




[img][/img]

oh look at all that bling!!

quote:

---

Originally posted by Mark Allanson
..and with the lid on

---

here's mine - 6mm ply, covered with 3mm foam, then black vinyl. Hinged section opens for access to fuel filler diff area etc (no boot box) and has a panel lock although it's really only to keep the lid closed.
Rescued attachment P1060356.JPG