i've got rivnuts in the car already form where there were mirrors in its previous job racing, but no idea what type they are.
i need some IVA suitable ones.
rivnut mounting holes are 38mm apart (like SPA mirrors, which are too small for IVA), and vertical. lots of bike mirrors i've seen only seem to fit horizontal
also, being rivnuts, they need to be secured with bolts from the outside, and probably covered with a rubber boot, and not a fixed bolt with nut arrangement.
lastly, must not be more than 20cm length in total really. want to keep them within the bodywork so that some of the IVA requirements aren't needed

here's a photo

Description

suzuki gsxr 1000 mirrors are decent but not sure if mounting holes are exact

might be worth a shot, they look pretty good. but IVA says they have to be 70mm tall, and be able to fit a 70mm x 40mm rectangle in the glass. they seem to be 55mm tall? the one's i've seen anyway...
are they ok because they're off a type approved bike?

[Edited on 18/1/12 by blakep82]

look in my build diary. i uploaded some photos before mate

was it this one?

mirror

yeah they look good! and good for IVA too then?

look in my build diary mate under all my posts. bottom of first page. 3 pictures and if you click on them they will enlarge

yes they look perfect mate, thank you! and of course, E marked. forgot that one ha ha
i'm sure the mounting is the same, can't be that far out surely

quote:

---

Originally posted by daniel mason
suzuki gsxr 1000 mirrors are decent but not sure if mounting holes are exact

---

Suzuki gsxr 1000 mate

any particular year as I search ebay and there are few different ones.

Neil