Board logo

Fitting Ebay Fibreglass Aeroscreen
andy350z - 9/9/09 at 08:48 AM

What is the best way of fitting a fiberglass aeroscreen to a Tiger Avon.

Can I just bond it on with Tiger Seal or similar? Rivet it? Or some type of bolt?

Thanks

Andy

richwill - 9/9/09 at 09:04 AM

I fixed mine with motorbike fairing bolts from Halfords. Rubber type expansion bolts just drilled through and tightened .

melly-g - 9/9/09 at 09:35 AM

Fixed mine with small M4 bolts (allen dome head).

Flamez - 9/9/09 at 09:53 AM

Rivet in the centre front to hold in place and dome head bolts down the side. I also used "P" edge trim along the join.

ns decals
ns decals

andy350z - 9/9/09 at 12:21 PM

Thanks all, just been to Halfords for some fairing bolts.

andrew.carwithen - 9/9/09 at 05:01 PM

Used large black roundhead self-tappers (4mm I think) to fix mine all along leading edge. Oh, and black'tadpole' trim sandwiched between aeroscreen and scuttle.

[Edited on 9/9/09 by andrew.carwithen]

[Edited on 9/9/09 by andrew.carwithen] Rescued attachment sva3 008.JPG
Rescued attachment sva3 008.JPG