Board logo

Bubble screen
Stuart_B - 28/5/09 at 06:54 PM

hi all, i fitted my bubble screen this afternoon, and took it for a test drive and what a differance, it is so much better, i can were just sunglass and i am fine at the speeds where i could not be for long before. as well i can here my great exhaust note, not just a load of wind noise and a little bit of noise, now i can here it all.

well here are some pics, i have got to make a new dash, as i have a koso dash to fit, new savavge switch's and oil pressure and possible a built in sat nav.

bubble screen fitted
bubble screen fitted

bubble screen fitted 1
bubble screen fitted 1

bubble screen fitted 3
bubble screen fitted 3

bubble screen fitted 4
bubble screen fitted 4

bubble screen fitted 5
bubble screen fitted 5


what do you think?

thanks

stuart


LBMEFM - 28/5/09 at 06:56 PM

Sexy


madteg - 28/5/09 at 07:51 PM

Second that they are brill


omega0684 - 28/5/09 at 08:14 PM

fan-dabby-dosey, is it the plastic one of ebay?


Stuart_B - 28/5/09 at 08:18 PM

yes, it is the fiberglass one from ebay.

just need to get some stainless steel stone gaurds as well.

stuart


omega0684 - 28/5/09 at 08:44 PM

i may have some in the garage what size do you need?


Stuart_B - 28/5/09 at 08:49 PM

i got some of obp, but i have put the rear arches on the wrong way around the teh angle is wrong, so i was going to get them customed made, as my mate said if i draw a card template he will make it for me for free, as he needs my help a bit of the time, with jetski's, and he will be build a seven soon as well.lol

but thank you very much for the offer.

stuart


GH1985 - 28/5/09 at 09:07 PM

Like the screen, where can I get one from ?
Just been searching on e-bay, but can't find it.


Danozeman - 28/5/09 at 09:11 PM

Looks good mate. Has it really made that much difference??

Mine dont do alot.

These are they


RK - 28/5/09 at 10:24 PM

Looks nice! Did you make or buy those nice sill guards?


Stuart_B - 29/5/09 at 08:13 AM

yes, i think it was, but as i am short, it all goes straight over my head, well a little bit hits my hair, but that is about it.

i think i have seen you car at a show and you stepping out, are you faily tall?

as well the sill gaurds are home made, on my home made bender, out of stainless, and poilsed on the poilshing mop.

cheers

stuart


Echidna - 7/6/09 at 07:34 PM

A very similar to this in carbon will cost 110GBP plus shipping. I will post some pics soon, for anyone interested just send a U2U or email me at the address you read at my signature.