Board logo

Anti-slip tape
dunk3 - 8/4/09 at 02:11 PM

Hi all Looking to get some of that Anti-slip tape for my pedals, where can i get it from. cheers.


nib1980 - 8/4/09 at 02:12 PM

ebay. look for skate board tape.

or try your local skate shop


Mr Whippy - 8/4/09 at 02:12 PM

type - anti slip tape

into google


owelly - 8/4/09 at 02:13 PM

I bought some from the local chandlers. They had it in tape, patches or rolls.


JAG - 8/4/09 at 02:14 PM

A couple of sources;

1) skateboard shops - grip tape, used on the top of the boards.

2) IKEA - grip tape for stair treads etc...

IKEA is the cheapest source I've found but it comes on a roll and is only about 30mm wide.


Staple balls - 8/4/09 at 02:20 PM

quote:
Originally posted by JAG
A couple of sources;

1) skateboard shops - grip tape, used on the top of the boards.


If you have a youngish attractive female to hand, send her to get some and you'll probably get it for free.


Thinking about it - 8/4/09 at 02:32 PM

A chandlers. I have also seen it in B&Q as antislip for steps.


sickbag - 8/4/09 at 02:35 PM

or for a locost solution you could glue some sand-paper off-cuts to your pedals.


MikeCapon - 8/4/09 at 02:42 PM

^^^

Wot he said. On rally cars we used to stick emery cloth with contact adhesive. Your driving boots wear out before the emery.


blakep82 - 8/4/09 at 03:08 PM

quote:
Originally posted by Staple balls
quote:
Originally posted by JAG
A couple of sources;

1) skateboard shops - grip tape, used on the top of the boards.


If you have a youngish attractive female to hand, send her to get some and you'll probably get it for free.


or just send her my way


Benzine - 8/4/09 at 03:10 PM

quote:
Originally posted by Mr Whippy
type - anti slip tape

into google


You should have used http://tiny.cc/OIAdT for extra lulz


g.gilo - 8/4/09 at 03:11 PM

have sent u2u


sorens2 - 8/4/09 at 03:24 PM

I have used this tape.
Very good.

http://www.heskins.com/nonsliptape.htm

Soren S2 Rescued attachment tape 2.JPG
Rescued attachment tape 2.JPG


sorens2 - 8/4/09 at 03:25 PM

And...

But is tape the best way for pedals ?
Will it last ?

Soren S2

[Edited on 8/4/09 by sorens2] Rescued attachment tape1.JPG
Rescued attachment tape1.JPG


JAG - 8/4/09 at 03:30 PM

quote:

But is tape the best way for pedals ?



Depends what your pedals are made of. I made my brake and clutch pedals of Alu' and I put some anti-slip tape on them.

My throttle pedal is steel. I put some ribs on the steel pedal face with my MIG welder.

I guess you could use some kind of chequer plate too.