Board logo

Have faith - But DON'T try this at home!!!!
Nick DV - 11/7/10 at 08:21 AM

All I can say is "zoiks!!!"

http://www.youtube.com/watch_popup?v=E3mzhvMgrLE&NR=1

Cheers, Nick

40inches - 11/7/10 at 08:47 AM

scootz - 11/7/10 at 09:12 AM

Look at the damage to the saw...

Think I'd rather lose a finger - I do have 14 of them after all!

eddie99 - 11/7/10 at 09:25 AM

Wow , think i'd prefer to be careful in the first place!

[Edited on 11/7/10 by eddie99]

NigeEss - 11/7/10 at 10:49 PM

Keep up at the back

chrsgrain - 12/7/10 at 09:26 AM

If the machine was properly guarded, then that wouldn't be needed..... though its very clever.

Chris

Stuart_B - 12/7/10 at 05:58 PM

very good

hillbillyracer - 12/7/10 at 07:32 PM

Well worth the damage to the saw to save your hand but how sensitive is it to other things, will a damp spot in a sheet of ply where the roof leaked in or you spilt your tea trip it & cost you a load of time & money?

JoelP - 13/7/10 at 08:07 PM

quote:
Originally posted by hillbillyracer
Well worth the damage to the saw to save your hand but how sensitive is it to other things, will a damp spot in a sheet of ply where the roof leaked in or you spilt your tea trip it & cost you a load of time & money?


or if your finger brushes the side of the blade whilst moving an offcut? I often stop the blade by pressing on the side.

I think you would spend a fortune on new parts for it, the solution is to just take care using a normal saw.