Board logo

Gat to english translator requiredes
Mark Allanson - 5/12/06 at 10:37 PM

Can anyone tell me what this means, and more to the point, what to do about it

Thanks
Mark Rescued attachment Windoze Error.JPG
Rescued attachment Windoze Error.JPG

Fatgadget - 5/12/06 at 10:46 PM

It means you have performed an illegal act.

Okay I will get me coat.....

caber - 5/12/06 at 10:46 PM

It means " Windows is screwed up again!"
What to do ? Buy a Mac

Caber

tegwin - 5/12/06 at 10:46 PM

What causes the error message to appear?

Mark Allanson - 5/12/06 at 11:01 PM

quote:
Originally posted by tegwin
What causes the error message to appear?


Its the first thing to appear when starting windoze, it started when I installed the ATI catalyst drives to enable twin display.

I have tried reinstalling them and even trying alternative ones but to no avail

MikeR - 5/12/06 at 11:29 PM

ok, .net is a programming support system. Microsoft provide a load of routines that developers use. Its set up a bit like a tree structure or the enterance to an housing estate - bits lead to other bits.

The message is basically saying "the bit of the system that says where we can find .net is wrong, we've looked there and we can't find the start of the housing estate. Correct it before we continue".

Best solution i'd guess is to try and repair the installation via the add / remove software. if that doesn't work, download .net from the microsoft web site, remove it from your computer via add/remove and install it fresh.

Fatgadget - 6/12/06 at 12:23 AM

Have you tried performing a system restore by rolling back?

02GF74 - 6/12/06 at 10:10 AM

quote:
Originally posted by Fatgadget
Have you tried performing a system restore by rolling back with a large hammer?

Mark Allanson - 6/12/06 at 06:38 PM

quote:
Originally posted by 02GF74
quote:
Originally posted by Fatgadget
Have you tried performing a system restore by rolling back with a large hammer?


I'll try MikeR's suggestion first!!

MikeRJ - 11/12/06 at 06:57 PM

The problem is that the ATI Catalyst control panel has been written using the .NET framework, and you do not have this installed on your machine.

Download and install the version 1.1 .NET framework from Microsoft