[Edited on 30/10/10 by LBMEFM]
Please, please someone help me. I have Built my MK, restored many classics, managed several companies and now run my own business yet still I cannot
get an avatar pic loaded . I have used http://www.fookes.com/ezthumbs/ to resize the pic which is now in my Photo Archive but if I open my Control
Panel and edit it will not load onto the avatar. For it drives me insane what have I got to do next
[Edited on 30/10/10 by LBMEFM]
I think it might be a little bit too wide. Try to reduce it a bit more.
I assume you have found where to put the location in your profile.
it's 200 wide but high res (300)
I'll re size and post it up.
Paul G
Down load it and rename as marmite2 and try again. (now 72 pix per inch res)
Paul G
Image deleted by owner
p.s. Hi Matt
[Edited on 30/10/10 by 907]
Thanks Paul, but without sounding like a complete tw&t, please now show me a complete idiots's step by step guide on how to load it to my avatar. Then at last maybe I can go to bed. thanks
Edit Profile...
Avatar URL
http://locostbuilders.co.uk/upload/marmite1.jpg
Click on "Control Panel / Options" at the top right of the page.
Click "Edit Profile"
Paste http://locostbuilders.co.uk/upload/marmite1.jpg
into the Avatar URL: box.
Click "Edit Profile"
Job done.
1 right click on the pic in my post.
A menu will drop down. Click on "save picture as" and name it, at it will save to your pooter.
(A usefull way of saving any pic off any post or site)
Up load to photo archive and you can then add it to your control panel.
Paul G
[Edited on 30/10/10 by 907]
Steve & Ian
If I then delete it from my archive now will it disappear?
Paul G
quote:
Originally posted by 907
Steve & Ian
If I then delete it from my archive now will it disappear?
Paul G
Done as instructed copied the new resized picture, pasted it into the avatar url box, pressed edit and still end up with a bl**dy little red cross in
a box instead of the pic
<<<<<<Look there, still no pic, is it me??
[Edited on 30/10/10 by LBMEFM]
quote:
Originally posted by iank
quote:
Originally posted by 907
Steve & Ian
If I then delete it from my archive now will it disappear?
Paul G
Yes, I believe it will
Your avatar box should read:-
http:www.locostbuilders.co.uk /upload/ whatever pic is called.jpg
with no spaces
quote:
Originally posted by LBMEFM
Done as instructed copied the new resized picture, pasted it into the avatar url box, pressed edit and still end up with a bl**dy little red cross in a box instead of the pic
<<<<<<Look there, still no pic, is it me??
[Edited on 30/10/10 by LBMEFM]
In your archive it's called marmite locost.jpg (with a space)
Call it marmitelocost.jpg and see if that does the trick.
Sorry but it's time for bed. Up at 6 in the morning. Good luck.
Paul G
[Edited on 31/10/10 by 907]
Thanks for your help guys, have tried all of your suggestions, still no luck with it, I am sooooo tired and frustrated I have got to go to bed now.
Once again thanks, I am sure it was easier to build the car than get an avatar pic. Barry
quote:
Originally posted by iank
quote:
Originally posted by LBMEFM
Done as instructed copied the new resized picture, pasted it into the avatar url box, pressed edit and still end up with a bl**dy little red cross in a box instead of the pic
<<<<<<Look there, still no pic, is it me??
[Edited on 30/10/10 by LBMEFM]
The url for the little red box is
http://www.locostbuilders.co.uk/forum/38/marmite%20locost.jpg
did you paste in the marmite1.jpg image?
Good morning, I am determined to see this through, is anybody still with me? It still shows a red cross. If I right click on the cross the properties
are shown as http://www.locostbuilders.co.uk/forum/38/marmite%20locost.jpg which is the same as I pasted into the slot at the bottom of the edit page.
What do I do next or what have I done wrong now please?
[Edited on 31/10/10 by LBMEFM]
Morning Barry. I trust you slept well.
Image deleted by owner
Start again.
Right click on the above.
left click on save picture as and save it as marmite4 (NO Spaces)
Upload it as marmite4 to your archive.
Type into the avatar box http://www.locostbuilders.co.uk/upload/m a r m i t e4.jpg (with NO spaces)
Click edit
Cheers
Paul G
[Edited on 31/10/10 by 907]
Get rid of the % in the URL, thats whats killing it, rename.
Just checking it worked for me? If it did, then an alternative to typing the URL is to click on the pic in the photo archive and copy it's
location, then paste it into the avatar location field in control panel.
Cheers Chris
Mark the %20 is web speak for a space.
Looking at what you avatar URL is now it looks like you just have the wrong location:
http://www.locostbuilders.co.uk/forum/38/marmite%20locost.jpg
it should be:
http://www.locostbuilders.co.uk/upload/marmite%20locost.jpg
Nowt wrong with your image just tried using it as my avatar.
You are scrolling down the page after pasting it into avatar url and clicking edit profile.
Cheers,
Bob
As per Chris above, to make this your avatar
Description
Put this in the Avatar box:
http://www.locostbuilders.co.uk/upload/marmite%20locost.jpg
[Edited on 31/10/10 by stevebubs]