Board logo

alloy jacks
jonesier1 - 19/2/10 at 09:36 PM

thinking of treating myself to a new trolley jack and fancy a flash alloy job which is nice and light,but been told the ones with the single steam roller type front wheel is wobbly and unstable.seen them for about 90 quid ish for 1.25t.
any experience or advise ? Rescued attachment alloy jack.jpg
Rescued attachment alloy jack.jpg


Stott - 19/2/10 at 09:50 PM

discussed a bit here: http://www.locostbuilders.co.uk/viewthread.php?tid=126336

HTH
Stott


rusty nuts - 19/2/10 at 10:03 PM

We have one at work , already falling to pieces . No where near as good as my 34 year old Bradbury!


nick205 - 19/2/10 at 10:04 PM

IMHO unless you're going to spend a lot of time carrying it around with you a normal steel trolley jack is much better value and more robust.


Cousin Cleotis - 19/2/10 at 10:05 PM

£90 for an aluminium jack? come on, work it out, you get what you pay for, its obviously a peice of shit.

Paul

Edit, sorry not very helpful, i use one of these almost daily for the last year, good value for money if you want someting new. not a quick lift but it lifts quicker than my old bradbury. http://www.machinemart.co.uk/shop/product/details/ctj3000g-3-tonne-professional-garage-j/path/trolley-jacks-bottle-jacks-transmission-jacks

[Edited on 19/2/10 by Cousin Cleotis]


Richard Quinn - 19/2/10 at 10:09 PM

I've got one and it's fine! My steel one isn't low enough to go under the Locost


SPYDER - 19/2/10 at 10:19 PM

I've got a US Pro aluminium jack with roller type front and TWO pistons. It's a little more substantial than the very cheap ones but still a lot lighter than a steel one. It is also very low. It's perfect for taking on trackdays, so much easier to get in and out of the back of the car.
Geoff.


Cousin Cleotis - 19/2/10 at 10:22 PM

It would appear that there is a 50/50 split between people that get a decent one and people that get a poo one. Buy 2 and you stand a chance of getting a usable jack. Or stop being wusses and get a proper heavy steel jack.

Paul


snakebelly - 19/2/10 at 10:32 PM

i have one that is identical to the one in the picture, apart from thread locking all the bolts after the first year its been fine, about 2 years old now and used at least every week.


britishtrident - 20/2/10 at 10:57 AM

I used to design light alloy jack type machines for lifting manhole covers for a living ----- as to "aluminium" trolley jacks, I wouldn't barge one with touch pole.

A cheap 13 quid steel trolley jack from Lidl is just as portable and much more likely to withstand rough use.

For at home use spend 70 quid or so on a proper pro-quality garage jack, it will last a life time.

[Edited on 20/2/10 by britishtrident]


snakebelly - 20/2/10 at 12:57 PM

we bought one of these becuase it would actually go under a 7esque car, all the steel and pro one we looked at were too high