clanger
|
| posted on 13/2/08 at 08:06 PM |
|
|
cheapo ebay plasma cutter - recommended
Hi,
Just thought I'd give some consumer related feedback about an "ebay special" plasma cutter I just bought.
After off-loading some other junk on the bay I treated myself to a plasma for my ZX12 Mini project. (There's alot of rust believe me)
Anyway, back to the plasma. Just give it a wurl in the garage and it does an excellent job. The 12mm stated cutting thickness is a little optimistic
but it flies through anything up to about 6mm, and I mean flies !!!!! Flimsy Rover Mini sheet metal and aluminium are no match for it
Basically as quick as undoing a zip 
Very little dross on the reverse edge, but it gets better with speed practice and smoothness.
Ditch the cheapo welding mask and chipping hammer that comes with it. Otherwise its a tidy bit of kit.
Took just under a week from Germany from these guys, werkzeuge-online.
Suspect its of chinese origin as most things are these days.
No good for cutting up oil-rigs or oil tankers etc but a bloody good DIY tool. The prices do inevitably vary on the bay, so keep an eye out for a
finishing auction in the weee hours or when everyones watching Corrie!
My tuppence worth for anyone considering.
[Edited on 13/2/08 by clanger]
 
Rescued attachment 11250m.jpg
|
|
|
|
|
muzchap
|
| posted on 13/2/08 at 08:23 PM |
|
|
Excellent - what size compressor are you using when running it? 
------------------------------------
If you believe you're not crazy, whilst everybody is telling you, you are - then they are definitely wrong!
------------------------------------
|
|
|
COREdevelopments
|
| posted on 13/2/08 at 08:47 PM |
|
|
funny that i was looking at the same plasma and was wondering how good they are, il keep an eye out for one.
Rob
also did you say you were doing a bike engined mini! what stage you at? got any pics? i love my minis!
[Edited on 13/2/08 by COREdevelopments]
|
|
|
clanger
|
| posted on 13/2/08 at 09:01 PM |
|
|
quote:
Originally posted by muzchap
Excellent - what size compressor are you using when running it?
I got a decent, but not huge 150litre 9 bar Ingersoll, running at about 11CFM.
A smaller one should power it easy over shorter cutting distances. Its so fast that its literally seconds per cut. If you use a blow gun for blasting
swarf out of holes you'l be ok with whatever you got I think. Just don't use one of those teeny weeny Lidl types to power it.
|
|
|
COREdevelopments
|
| posted on 13/2/08 at 09:04 PM |
|
|
i just bought a 3hp 50 litre off ebay for 100quid, the seller had about 3000 and i had the last one, it looks ok aint run it up yet though. hopefully
that should do it?
|
|
|
clanger
|
| posted on 13/2/08 at 09:05 PM |
|
|
quote:
Originally posted by COREdevelopments
funny that i was looking at the same plasma and was wondering how good they are, il keep an eye out for one.
Rob
also did you say you were doing a bike engined mini! what stage you at? got any pics? i love my minis!
[Edited on 13/2/08 by COREdevelopments]
Very much at the planning stage at the mo Rob,
Got me Mini (with extra rust!!!)
Got me motor ZX12 (still attatched to the bike!!!)
Got me Plasma (all shiny & new)
Got me enthusiasm
Got me a list of domestic jobs and chores to get out of the way first
|
|
|
dhutch
|
| posted on 13/2/08 at 09:40 PM |
|
|
I guess this is from seller 'werkzeuge' ?
http://search.ebay.co.uk/plasma_W0QQcatrefZC6QQfromZR10QQfsooZ2QQfsopZ32QQftrtZ1QQftrvZ1QQga10244Z10425QQlredZplasmaQQsabfmtsZ1QQsacatZQ2d1QQsaobfmtsZ
insifQQsassZwerkzeugeQ2donline
Not sure i can justify one yet, but usfull for others.
Daniel
|
|
|
big_wasa
|
| posted on 13/2/08 at 09:41 PM |
|
|
I treated myself to a Rehmann unit for xmas.
Not had much of a chance to play with it but seems to live upto the specs
|
|
|
