Chippy
|
| posted on 5/3/07 at 10:41 PM |
|
|
Grommet required
Hi All, I have been trying to locate a 1"o/d rubber grommet, with no luck whatsoever. Anybody got one hiding in there "handy to
keep" bin, that they could help me out with. Idealy fit in 1" (25mm) hole, with 3/8" (9mm) centre hole, or there abouts. Thanks, Ray
To make a car go faster, just add lightness. Colin Chapman - OR - fit a bigger engine. Chippy
|
|
|
|
|
Hellfire
|
| posted on 5/3/07 at 10:42 PM |
|
|
Wallace maybe has the one you need, unsure of the size though....
wallace@gromit.co.uk
Sorry... I'll get me coat!
Steve
|
|
|
nitram38
|
| posted on 5/3/07 at 10:44 PM |
|
|
Any electrical wholesaler will do them.
|
|
|
bob
|
| posted on 5/3/07 at 10:45 PM |
|
|
Ray
I'll have a look in the cave tomorow 
|
|
|
Chippy
|
| posted on 5/3/07 at 10:48 PM |
|
|
Hellfire
I should have expected that, 
Bob
Thanks mate, appreciated, Ray
To make a car go faster, just add lightness. Colin Chapman - OR - fit a bigger engine. Chippy
|
|
|
shortie
|
| posted on 5/3/07 at 11:13 PM |
|
|
I think I have some for a 1in hole with a centre you can cut to size if that helps
Rich.
|
|
|
rayward
|
| posted on 5/3/07 at 11:35 PM |
|
|
u2u me you address, i'll stick a couple in the post.
Ray
|
|
|
bob
|
| posted on 6/3/07 at 11:41 AM |
|
|
Looks like Ray might be able to help Ray....... the best i could do was 3/4 inch grommet or the 1" plug which as shortie said could be
holed.
 
Rescued attachment parts0741.JPG
|
|
|
Chippy
|
| posted on 6/3/07 at 11:03 PM |
|
|
Thanks guy's, have sent my address to Rayward, so should be OK. Thanks again, Ray
To make a car go faster, just add lightness. Colin Chapman - OR - fit a bigger engine. Chippy
|
|
|
