ned
|
| posted on 9/3/06 at 01:22 PM |
|
|
need small lathe/mill piece making
small ally cylindrical piece with an off centre hole and some spanner flats at one end, needs to be accurate as its part of a tensioner assembly for
my engine. I can take a picture later to give an idea and can send the one i have (borrowed off a mate) to be copied.
Anyone able to do this for me for reasonable remuneration?
cheers,
Andrew.
[Edited on 9/3/06 by ned]
beware, I've got yellow skin
|
|
|
|
|
eddymcclements
|
| posted on 9/3/06 at 01:36 PM |
|
|
Can do it for free if you send me the sketch. I have a shedload of ally bar in 25mm, 50mm and 75mm. Can insert a ball race if required.
You could upload the photie / drawing to your Photo Archive and I can get it from there.
Cheers,
Eddy
[Edited on 9/3/06 by eddymcclements]
|
|
|
ned
|
| posted on 9/3/06 at 02:04 PM |
|
|
well get a piccie and some measurements tonight.
many thanks..
Ned.
beware, I've got yellow skin
|
|
|
ned
|
| posted on 9/3/06 at 08:51 PM |
|
|
hopefully this makes sense. drawing/sketch is not to scale 
THE 141MM MEASUREMENT IS ACTUALLY 41MM, I MISREAD IT OFF MY RULE!
[Edited on 14/3/06 by ned]
 
Rescued attachment IMG_1869b.jpg
beware, I've got yellow skin
|
|
|
ned
|
| posted on 9/3/06 at 08:51 PM |
|
|
and another
 
Rescued attachment IMG_1872b.jpg
beware, I've got yellow skin
|
|
|
