Alan M
|
| posted on 6/4/10 at 04:23 PM |
|
|
Carb & manifold bits
Just fitted megasquirt to my xflow but need a couple of bits. Can anyone help please:
4 x Blanking screws that fit in top of DHLA carbs when Manometer take offs are removed.
1 x Inlet manifold servo take off blanking plug.
1 x DHLA TPS mounting bracket, etc
|
|
|
|
|
r1_pete
|
| posted on 6/4/10 at 04:39 PM |
|
|
I think I have a set of blanking screws, can you check what thread they are and I'll make sure they are correct for you....
|
|
|
Alan M
|
| posted on 6/4/10 at 05:04 PM |
|
|
I think they are
Thread length = 5mm
Thread diameter = 6.5mm
I got this off the Dellorto website for the take offs, which I have, just need something to plug them up when not in use
|
|
|
r1_pete
|
| posted on 6/4/10 at 05:41 PM |
|
|
Found them, they are 5mm M5 thread, still have the fibre washers amazingly...
 
Rescued attachment Plugs.jpg
|
|
|
Alan M
|
| posted on 7/4/10 at 08:54 AM |
|
|
U2U sent
|
|
|
