dunk3
|
| posted on 12/10/09 at 06:07 AM |
|
|
front indicators
Hi all, has anyone got a pair of front indicators what they have passed the SVA or IVA with, that they dont need anymore.
|
|
|
|
|
mad4x4
|
| posted on 12/10/09 at 06:47 AM |
|
|
I just used small bike ones (oxford range) on 5" extended Stalks. (made the extensions out of a bit of tube with a nut clamped into it at each
end)
Hope this helpd.
Remember to put a bit of Ali behind the nut if you bolt to the fiberglass to give it strength and stop the f/glass flexing.
Ofcourse after the SVA the extensions "Fell off"
[Edited on 12/1010/09 by mad4x4]
Scot's do it better in Kilts.
MK INDY's Don't Self Centre Regardless of MK Setting !
|
|
|
dunk3
|
| posted on 12/10/09 at 06:53 AM |
|
|
Hi mad4x4 have you got any pics
|
|
|
BenB
|
| posted on 12/10/09 at 08:28 AM |
|
|
I went for some Land Rover ones held forwards on lengths of black 40mm waste pipe. At each end I made a flange of MDF (also painted black) which was
bolted beneath the headlight support at the rear and which the indicator screwed into at the front.
|
|
|
Steve Hignett
|
| posted on 12/10/09 at 08:32 AM |
|
|
Yours are great Ben, but they prob need to be further out than that on an MK.
I have a couple of extenders that I made that aren't being used at the moment. I think they are something like M10Fine on the outside to take a
normal or aftermarket bike indicator and M10 normal on the inside to bolt to the nosecone...
Think I have a pic somewhere...
 
Description
|
|
|
Dangle_kt
|
| posted on 12/10/09 at 09:19 AM |
|
|
Steve I think said extenders are actually in my sva bits box.
Your welcome them back if they will be any use for project "x", or you can pass them on.
|
|
|
