Board logo

Sierra(Girling) master cylinder
Mat-d-Rat - 30/6/08 at 09:52 AM

I need to replace my brake cylinder, anyone got one the same (most because the brake pipes are in place for this)?

TIA Rescued attachment dead.jpg
Rescued attachment dead.jpg

Mr Whippy - 30/6/08 at 09:59 AM

If someone can confirm that, that is the same as the cortina one (which it sure looks like) then I have a brand new unused one for sale £40

simoto - 30/6/08 at 11:52 AM

If the above doesnt work out i have something very similiar fitted to my car(good used), I will gladly let it go as the system is still dry yet and i want a bias one for competition.

Oh, and first post, hello everyone from depreston.
Si.

Mr Whippy - 30/6/08 at 12:11 PM

quote:
Originally posted by simoto
If the above doesnt work out i have something very similiar fitted to my car(good used), I will gladly let it go as the system is still dry yet and i want a bias one for competition.

Oh, and first post, hello everyone from depreston.
Si.


I'd recommend a bias valve, I tried the pedal one, it's mega acquired in a 7

saying that I think I have one of those for sale too

simoto - 30/6/08 at 12:58 PM

I have a striker and the pushrod of the current mc doesnt appear to line up with the pedal correctly.
Also the pedal box is obviously drilled for something else. Added to that the brake lines sylva have fitted wont marry up with the it.
I assume bling piracy has taken place as i have bought the car in a part built state.
Does the main body of your bias mc run broadly east west across the car when fitted?

Sorry, clueless but determined in depreston.
Si

Mat-d-Rat - 30/6/08 at 05:00 PM

Neither seem suitable any further offers?