Board logo

efi and ecu for 2litre zetec needed?
jimbona - 8/10/06 at 02:36 PM

hi everyone,
has anyone got a 2 litre zetec fuel injection system handy?

pictures would help!

many thanks,


rayward - 8/10/06 at 04:06 PM

i;ve got a standard ECU,,

Rau


jimbona - 8/10/06 at 10:19 PM

well if you havent got a use for it I am interested in buying one for a good price. Im Cambridge based...


rayward - 9/10/06 at 09:16 AM

make me an offer, u2u if you like

Ray


jimbona - 9/10/06 at 03:17 PM

ok mate will do, can you confirm exactly what bits you have? sorry that might just be the ECU unit but Im always learning!

thank you


rayward - 10/10/06 at 10:30 PM

just the ecu,

Ray


jimbona - 11/10/06 at 12:42 PM

finking...


jimbona2 - 17/10/06 at 09:33 AM

sorry for the delay but basically im not sure what else i'll need to get the engine running so im not sure how much to quote... its proving hard to find out what bits I need and how much so i'll get back to you when i can.

(i've had to create a new account, hence username jimbona2)


jimbona2 - 17/10/06 at 10:35 AM

this is what I have at present, any ideas what i need? Rescued attachment DSCN0066.JPG
Rescued attachment DSCN0066.JPG


jimbona2 - 17/10/06 at 10:37 AM

the other side Rescued attachment DSCN0069.JPG
Rescued attachment DSCN0069.JPG


ChrisW - 17/10/06 at 12:43 PM

You'll need an inlet manifold, fuel rail, throttle body, injectors, loom and ECU. Also the CPS if it's not there already (make sure it's the same one (including the housing) from the size engine that is in your car)

Your best bet would be to find a 1.8 or 1.6 Escort inlet, and fit the Mondeo 2.0 (biege) injectors and throttle body to it. The injectors are a straight swap, but the throttle body needs a little attention from the grinder to make clearance.

Oh, and use a Megasquirt ECU - far easier than the standard item. No PATS for a start. It is possible on the Mondeo management, but it's a lot of grief when you can run Megasquirt for ~£100.

Chris


jimbona2 - 26/10/06 at 04:40 PM

would you recommend this?


FORD ESCORT1600 ZETEC INLET MANIFOLD (LATE SHAPE)

http://search.ebay.co.uk/search/search.dll?sofocus=bs&sbrftog=1&fcl=3&from=R10&satitle=zetec+inlet&sacat=-1%26catref%3DC6&sarg n=-1%26saslc%3D3&sadis=200&fpos=cb4+5rn&ga10244=10425&ftrt=1&ftrv=1&saprclo=&saprchi=&fsop=3%26fsoo%3D1

[Edited on 26/10/06 by jimbona2]


jimbona2 - 11/11/06 at 05:26 PM

hi everyone,
i have this now!! Rescued attachment DSCN0074.JPG
Rescued attachment DSCN0074.JPG


Peteff - 11/11/06 at 05:35 PM

Here&# 039;s a complete 1.8 escort zetec with inlet and exhaust manifold, £40 with 5 hours to go.


jimbona2 - 11/11/06 at 08:20 PM

thanks for the top tip but are you saying this is what else i need or its the whole thing in one for 40 quid.